| | Ivoclar Vivadent e.max CAD Cerec
Lithium disilicate (LS2) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results.
Years of clinical experience:
The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained.
Patients with devitalized teeth:
Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance.
Indications:
- Veneers (≥ 0.3 mm)
- Inlays and onlays
- Occlusal veneers, partial crowns
- Minimally invasive crowns (≥ 1 mm)
- Implant superstructures
- Hybrid abutment solutions
- Three-unit bridges up to the second premolar as the terminal abutment
Advantages:
- Excellent esthetics and high strength (500 MPa*)
- Versatile applications and extensive indication range
- Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm
- Clinical long-term success and scientifically documented results
- Natural-looking esthetics irrespective of the preparation shade
- Adhesive, self-adhesive or conventional cementation depending on the indication
| Prices range from R3 522.93 excl VAT
| |
EMAX_CAD_CEREC |
|
|
| | |
| | |
| | Ivoclar Vivadent e.max CAD
IPS e.max® CAD is a high-strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside).
The IPS e.max CAD blocks for chairside processing are available in 16 A-D and four modern Bleach BL shades. They are available in two levels of translucency and two sizes. There are also an even more opaque blocks for the fabrication of frameworks (layering technique) in the laboratory.
The IPS e.max CAD blocks with high translucency (HT) are used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers. For partial crowns and crowns, the less translucent (LT) blocks are used. The restorations are directly milled from the blue blocks. During a quick combined crystallization/glaze firing cycle, which supersedes polishing, the restorations acquire their high strength (360 MPa) and the desired esthetic properties (tooth shade, translucency, brightness).
The restorations can be additionally individualized using the Stain materials. Finally, the restorations are seated. As an alternative to being placed using the adhesive cementation technique, crowns may also be cemented self-adhesively or conventionally.
| | |
EMAX_CAD_E4D | |
|
| | |
| | |
| | IPS e.max ZirCAD for Cerec/inLab
IPS e.max ZirCAD for Cerec/inLab LT C17
IPS e.max ZirCAD LT are pre-shaded, monochromatic zirconium oxide blocks suitable for use in the dental laboratory and the dental practice. They are used to fabricate full-contour crowns and 3-unit bridges. The high strength of 1.200 Mpa* allows low wall thickness (posterior crowns 0.6mm, anterior crowns 0.4mm) and tooth-preserving preparation. After wet processing in the PrograMill One, the restorations are sintered e.g. Programat CS4. For glazing, the fluorescent IPS e.max CAD Crystall/Glaze Paste Fluo is available. Optionally, the restorations can be characterized using IPS e.max CAD Crystall/Shades and Stains. IPS e.max ZirCAD restorations are cemented with e.g. SpeedCEM Plus.
| | |
ZIRCAD_LT_C17 | | | | | |
| | |
| | Tetric CAD for CEREC
Tetric CAD for CEREC / inLab MT C14 / 5 A1
Tetric CAD is an aesthetic composite block for the efficient fabrication of indirect single-tooth restorations by means of the CAD/CAM technology. Tetric CAD is based on the proven Tetric technology and is the digital supplement to the direct restoratives of the Tetric Evo-Line.
Due to the pronounced chameleon effect, Tetric CAD restorations blend in with the residual tooth structure in an optically pleasing manner.
The restoration is polished after milling and then seated using an adhesive cementation protocol. This processing technique is very efficient and leads to an aesthetic result quickly and easily.
| | |
TETRIC_CAD_CEREC_INLAB_M | |
| | | |
| | |
| | IPS e.max ZirCAD for Cerec/inLab
IPS e.max ZirCAD for Cerec/inLab LT
IPS e.max ZirCAD LT are pre-shaded, monochromatic zirconium oxide blocks suitable for use in the dental laboratory and the dental practice. They are used to fabricate full-contour crowns and 3-unit bridges. The high strength of 1.200 Mpa* allows low wall thickness (posterior crowns 0.6mm, anterior crowns 0.4mm) and tooth-preserving preparation. After wet processing in the PrograMill One, the restorations are sintered e.g. Programat CS4. For glazing, the fluorescent IPS e.max CAD Crystall/Glaze Paste Fluo is available. Optionally, the restorations can be characterized using IPS e.max CAD Crystall/Shades and Stains. IPS e.max ZirCAD restorations are cemented with e.g. SpeedCEM Plus.
| | |
ZIRCAD_LT_C17_B45 | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications
- Crowns
- Inlays, onlays
- Veneers
Your Benefits
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
| ** Prices From R2282,09
| |
EMPRESS_CAD_CEREC | |
|
| | |
| | |
| |
IPS e.max CAD Crystall Stains Refill
Intensive stains in paste form for the reproduction of natural characteristics. They are optimally coordinated for use with IPS e.max CAD.
| | |
IPS_EMAX_CAD_CRYST_S | | | | |
|
| | |
| | Ivoclar Vivadent e.max CAD Crystallization Shade
IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYST_SH | | | | |
|
| | |
| |
IPS e.max CAD CER/inLab MO A14 (S) x 5
IPS e.max CAD is an innovative lithium disilicate glass-ceramic for CAD/CAM applications. This unrivalled material combines highly esthetic qualities with exceptional user-friendliness. Unlike other CAD/CAM materials, IPS e.max CAD covers a comprehensive spectrum of indications. A wide range of translucency levels, shades and block sizes offer greater flexibility for challenging clinical situations. Tried-and-tested cementation materials have been specifically designed to complement IPS e.max CAD to provide long lasting and durable restorations.
| | |
IPS_EMAX_CAD_INLA_MO | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max CAD Crystallization Pins
The crystallization pins are required for the crystallization of fully anatomical, milled IPS e.max CAD restorations. This firing tray must not be used to fire IPS e.max Ceram.
| | |
605368 | | | | | |
| | |
| | IPS e.max CAD Crystall/Add-On 5g Dentin
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
| | |
605365 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max® CAD Crystall./ Add-On, Liquid
For adjustments, such as in incisal/occlusal or dentin areas. These adjustments can be made directly with the crystallization firing or in a subsequent corrective firing cycle.
| | |
605569 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization
IPS e.max CAD Crystall./Add-On 5g Dentin
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
| | |
635549 | | | | | |
| | |
| |
Ivoclar Vivadent Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options:
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications:
- Crowns
- Inlays, onlays
- Veneers
Your Benefits:
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
IPS Empress CAD is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to inc
| | |
EMPRESS_CAD_E4D | |
|
| | |
| | |
| | Ivoclar Vivadent Telio System
Telio CAD
Telio CAD consists of acrylate polymer (PMMA) blocks for the fabrication of long-term temporaries using CAD/CAM technology.
Telio CAD provides a long-term provisional solution for CAD/CAM applications. This material is available via fabrication in-house utilizing authorized chairside design/milling systems. The restorations can be polished quickly and efficiently or they can be characterized with stains. Furthermore, incisal areas may be customized with light-curing layering materials or Telio Lab materials to attain highly esthetic results. Telio CAD blocks can be milled in the Ivoclar Vivadent PrograMill One, the CEREC System (Sirona) and Planmeca FIT System (E4D Technologies).
Telio CAD - the highlights:
- Long-term (12-month) wear period
- Durable shade stability and lifelike fluorescence
- 6 shades (BL3, A1, A2, A3, A3.5 and B1)
- Telio CAD blocks are available in 2 bridge sizes (B40L, B55)
- High material homogeneity due to industrial manufacturing process
- Temporaries can be easily reproduced.
Indications:
- Temporary anterior and posterior crowns
- Temporary anterior and posterior bridges with up to 2 pontics
- Temporary restorations on implants
- Therapeutic restorations to correct TMJ problems and occlusal adjustments
Additional Telio CAD Applications Telio CAD Abutment Solutions:
Telio CAD offers individual implant-supported restorations for the temporary treatment period. The Telio CAD A16 is used for the CAD/CAM-supported fabrication of temporary implant-supported hybrid abutment crowns for individual temporary single-tooth restorations. The homogeneous, highly cross-linked PMMA blocks feature a prefabricated interface of size S or L for the direct cementation onto the Ti base from Sirona.
Hybrid abutment crowns made of Telio CAD A16 combine abutment and monolithic crown in a 2-in-1 solution.
They are used after the insertion of the implant and before the placement of the permanent restoration made of IPS e.max CAD. Shape, esthetics and emergence profile can be easily adapted at any time. Telio CAD A16 thus represents the basis for the subsequent permanent restoration with IPS e.max CAD and IPS e.max Press Abutment Solutions.
Advantages:
- Immediate load-bearing ability when cemented to a titanium base or after the healing phase
- Easy design of the emergence profile
- Visualization of the permanent restorative solution
- Blocks are available in size A16 and six LT shades (BL3, A1, A2, A3, A3.5, B1)
| | |
TELIOSYS_CAD_E4D_LT | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max® CAD Crystallization Tray, Pins
Silicon nitride firing tray for the crystallization of IPS e.max® CAD restorations. The crystallization pins supplied are required for the crystallization of IPS e.max CAD LT restorations.
| | |
605367 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Paste
IPS e.max® CAD Crystall Glaze Paste
Special glaze paste to be used with fully anatomical IPS e.max® CAD restorations. It may be applied either prior to crystallization on the "blue" crown or in the subsequent firing cycle.
| | |
605363 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Liquid
IPS e.max® CAD Crystall./ Glaze Liquid
Special liquid to dilute IPS e.max® CAD Crystall./Shades and Stains and the IPS e.max CAD Crystall./Glaze Paste.
| | |
605366 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Spray
IPS e.max® CAD Crystall Glaze Spray
This is used with fully anatomical IPS e.max® CAD restorations. It is sprayed on the restorations once IPS e.max CAD. Crystall./Shades and Stains have been applied. Subsequently, the restorations are fired in a combined crystallization and glaze firing cycle.
| | |
605364 | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress CAD
IPS Empress CAD HT/LT Shade Guide A-D
To prevent cross-contamination in the oral cavity, the individual tabsand the entire shade guide are autoclavable.This material shade guide shows the A-D and Bleach shades in which the IPS Empress® CAD materials are available.
This shade guide shows the A-D and Bleach shades in which the IPS Empress CAD materials are available.
| | |
603418 | | | | | |
| | |
| | Ivoclar Vivadent Telio System
Telio CAD CEREC / inLab LT
Telio CAD are cross-linked PMMA blocks. As a result of the industrial polymerization process, the blocks feature high material homogeneity. Furthermore, the temporary can be easily reproduced at any time due to the CAD/CAM fabrication process.
| | |
TELSYS_CACE_INLAB_LT |
|
| | | |
| | |
| | Ivoclar Vivadent Telio System
Telio CAD for CEREC Starter Kit
The Telio CAD Starter Kit contains blocks, cementation material, a desensitizer and additional accessories for chairside applications with the CEREC System.
Kit Includes:
- 2 x Telio CAD for CEREC and inLab LT Blocks B40L, Shade: A1
- 3 x Telio CAD for CEREC and inLab LT Blocks B40L, Shade: A2
- 3 x Telio CAD for CEREC and inLab LT Blocks B40L, Shade: A3
- 1 x 6g Telio CS Link, transparent
- 1 x 5g Telio CS Desensitizer
- 1 x OptraPol Test Pack
- var. accessories
| | |
631697 | | | | | |
| | |
| | Ivoclar Vivadent
Scan spray
- The scan spray is used to matt glossy surfaces.
- including spray tube for better dosage
- Content: 400 ml per can
| | |
662766 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
Ivoclar Modeling Brushes Assortment
These high quality sable modeling brushes are made from pure Kolinsky Sable hair. Pure, sable hair brushes exhibit a super fine tip along with great body and moisture retention which allows for precise porcelain placement.
Includes:
- No. 10 Large Round (530388)
- No. 6 Medium Round (530387)
- No. G4 Medium Flat (530390)
- No. 4 Small Round (530386)
- No. G2 Small Flat (530389)
- No. 2 Small Round (530385)
- No. 1 Small Round (530384)
- No. 0 Small Round (530383)
| | |
IVO_BRUSH_SIZE | | | | | |
| | |
