2108 Results

IVOdentIVOhealthProduct Infoadditional 1additional 2Item number:ShadeSizeChoose ColourChoose TypeUnit MeasureQtyPrice

SRL Gilvest

Aluminium Oxide

An iron-free abrasive/refractory material for the toughest demands.

Application:

Wet and dry blasting

Grinding, lapping and polishing media

SRLALO50A
TETRIC_CAD_FOR_PROGRAMIL

Ivoclar Vivadent SR Triplex

Triplex Hot Trial Kit

Heat-initiated basal resin for total prostheses and rebates processed by condensation technique.

Content: 100g of powder, 50ml of fluid.

TRIPLEX_HOT_TRIAL_KIT_

High Level Instrument Disinfectant

Active Ingredients:

15% Isopropylol; 0.5% QAC Blend;

0.5% Tertiary Amine; 0.8% pH Buffer;

0.8% Corrosion Inhibitor; 0.3% Surfactant

 

Product characteristics:

Ready-to-use; Unfragranced;

Non-corrosive; Non-toxic; Non-staining

Non-caustic; Biodegradeable

 

Recommended Uses:

Disinfection of pre-cleaned

thermo-sensitive instruments.

Disinfection of pre-cleaned

instruments where a functional calibrated

autoclave is unavailable.

Where access to an approved, regularly maintained and tested autoclave is available, the autoclave should always be considered the primary means of sterilisation.

 

Instructions for use:

Decant the required amount of Cold Sterilant into a clean, dry, covered stainless steel or HDPE receptacle. Completely immerse thoroughly disassembled, pre-cleaned, rinsed & dried instruments / devices in the liquid, ensuring that any hinges or joints are in the open position. Allow a contact time as per your desired efficacy – see below efficacy table. Remove the instruments / devices from the liquid using sterile forceps, and follow the post-sterilisation procedure of the facility. Tray-life of the liquid should be tested weekly using M.E.C. strips. The product should have a tray-life of between 21 & 28 days, should the strips prove a shorter life, check your instrument cleaning process. For best results, replace the liquid every 28 days, or as soon as an MEC Test Strip reads less than 1000ppm active ingredient, or immediately if any change in liquid colour occurs.

 

Pre-Requirements:

Latex or nitrile gloves for sensitive skin, however OHSA requires the use of eye protection & good ventilation when mixing, handling or discarding chemical disinfectants.

 

Product Description:

  • Available sizes: 20L, 5L, 1L
  • Dilution Factor: Ready to use
  • Physical Form: Translucent blue liquid
  • Odour: Mild chemical fragrance
  • pH: 7-8
  • Tray Life: 21-28 days (MEC Test Strips available)
  • Product Risk Classification: C / IIb
  • GMDN Code: 47631
  • GMDN Descriptor: Medical Device Disinfectant
  • NRCS Reg. no: CT29GNR529/242056/040/497
  • Incompatibilities: Anionic detergents, Natural Soaps, Strong oxidisers
STESC2
558832

PrograMill PM3 

Both machines, PrograMill PM3 and PM5, deliver ideal performance for the digital dental laboratory. These units are suitable for wet and dry processing and offer a wide range of materials and indications.

The precise 5-axis machining process is controlled via the integrated PC with the touch-screen monitor. The fully automatic materials management checks whether the tools correspond with the respective machining strategy.The tool changer ensures that the production is carried out independently and consistently.

Your Benefits:

  • High precision and consistent results
  • Intuitive operation and touch-screen display
  • Integrated CNC PC and intelligent machine management

Features:

  • Tool changer for independent processing
  • Intuitive user interface for convenient production
  • Wet and dry operation for versatile range of options

Materials:

  • IPS e.max CAD
  • IPS e.max ZirCAD
  • IPS Empress CAD
  • Tetric CAD
  • Telio CAD
  • Colado CAD CoCr4
  • Colado CAD Ti5
  • SR Vivodent CAD
  • IvoBase CAD
  • ProArt CAD

Indications:

  • Inlays, Onlays, Veneers
  • Partial crowns, crowns
  • Bridges
  • Hybrid Bridges
  • Digital Complete Dentures

For orders call 0860 456 123 or email [email protected]

More details: 

https://www.ivoclardigital.com/en/laboratory/equipment-and-cam/programill-pm3

689238

PrograMill PM5 

Both machines, PrograMill PM3 and PM5, deliver ideal performance for the digital dental laboratory. These units are suitable for wet and dry processing and offer a wide range of materials and indications.

The precise 5-axis machining process is controlled via the integrated PC with the touch-screen monitor. The fully automatic materials management checks whether the tools correspond with the respective machining strategy.The tool changer ensures that the production is carried out independently and consistently.

The prograMill PM5 with its 8-way material changer, provides perfect automation for your laboratory. The material changer allows several production orders with different materials and indications to be processed. Individual machining strategies are used depending on the material and the indication. This allows short processing times for the respective restorations.

Your Benefits:

  • High precision and consistent results
  • Intuitive operation and touch-screen display
  • Integrated CNC PC and intelligent machine management
  • Automatic wet and dry management 

Features:

  • Fully automatic material and tool management
  • Automatic change between wet and dry operation
  • Intuitive operation on touch screen

Materials:

  • IPS e.max CAD
  • IPS e.max ZirCAD
  • IPS Empress CAD
  • Tetric CAD
  • Telio CAD
  • Colado CAD CoCr4
  • Colado CAD Ti5
  • SR Vivodent CAD
  • IvoBase CAD
  • ProArt CAD

Indications:

  • Inlays, Onlays, Veneers
  • Partial crowns, crowns
  • Bridges
  • Hybrid Bridges
  • Digital Complete Dentures

For orders call 0860 456 123 or email [email protected]

More details: 

https://www.ivoclardigital.com/en/laboratory/equipment-and-cam/programill-pm5

689239

Ivodent Online

Digital Denture holder rings

Two special rings have been developed to modify the PrograMill disc holder (not included in the delivery form) for the Digital Denture process. They enable  the precise repositioning of the milled disc. Once the upper side of the denture has been milled, it can be conveniently removed to adhesively cement the pre-fabricated teeth. Subsequently, the denture is repositioned for further processing.

689245

FitStrip double-sided medium grit 0.50mm refill

Bulk: 10 strips, 2 handles. Standard: 4 strips

GARFPSXTMDS
DF5501006

EMS GBT Flowcontrol X4

Materials

  • Body: PP (Polypropylene)
  • Skirt: TPE (Thermoplastic Elastomer)

Clinical Applications

  • Best aerosol/splatter control solution during GBT Protocol and general dentistry
  • Soft-tissue friendly

Compatibility

  • GBT Protocol
  • Standard 16 mm high-speed suction systems

Reprocessing Recommendations

  • Separate the body and the skirt for each reprocessing
  • Compatible with sterilisation at 135 °C

Lifetime

  • Body: Up to 250 reprocessing cycles
  • Skirt: Up to 250 reprocessing cycles
  • Reminder: Disassemble skirt from the body before each reprocessing
EMSFV112A
GARFPSXFDS4
BIOBSN2423
BIOBSN2425

Dentalfarm Bunsen Burner with Thermocouple

BUNSEN BURNER WITH THERMOCOUPLE
Safety Bunsen burners with thermocouple valve for immediate gas flow interruption should the flame accidentally extinguish.
The two models (DFA4701 and DFA4702) differ on the specific fitting according to the selected combustible.
Bunsen burners with built-in thermocouple valve are freeflame devices utilized to carry out small weldings and heatings.

Technical Features
• A4701 Bunsen burner for Natural Gas
• A4702 Bunsen burner for L.P.G. (Liquid Propane Gas)
• Pressure for Natural Gas: 22 mbar
• Pressure for Liquid Propane Gas: 0.1 – 0.5 BAR

DFA4701
DFA4702
INTSTYFIN01
1DTW14DCMF
GARSWBL

Ivoclar Vivadent IPS InLine One/POM

IPS InLine One Dentcisal

IPS InLine One is a revolutionary dentcisal powder that requires only one layering application. When maximum efficiency is the goal, InLine One is the solution.

IPS_INLINE_ONE_DENT_CISA

Ivoclar Vivadent Stratos Articulator

Incisal Plate 0 White: Stratos Articular

(1.1)

168015

Tungsten Carbide Cutters
Carbide cutters: for any application and all materials Carbide cutters from HORICO set the standard with their strength and fine grinding patterns. Plus, you can work in an ergonomically wrist-friendly way using almost no pressure. They are available with a variety of toothing any purpose. Therefore, you can work with the highest precision on any material – whether plaster, plastics or metal alloys.

194175040
194175045

Tungsten Carbide Cutters
Carbide cutters: for any application and all materials Carbide cutters from HORICO set the standard with their strength and fine grinding patterns. Plus, you can work in an ergonomically wrist-friendly way using almost no pressure. They are available with a variety of toothing any purpose. Therefore, you can work with the highest precision on any material – whether plaster, plastics or metal alloys.

237190023
To top