Dentalfarm

Dentalfarm Photopol Pro: LED Light-Curing Unit

UV LIGHT-CURING UNIT FOR COMPOSITES
Photopol PRO is a multi-purpose light-curing furnace which best suits with most composites sensitive to UV light.
Three extremely powerful circuits à 8 LED UV at different frequency assure the overall radiation.
The distinctive feature of each individual LED is a specific collimation lens focusing the light (therefore the emitted power) in a very restricted angle of incidence.
Both the working chamber and the horizontal plane are coated with highly reflecting material assuring a mirror effect with no dispersion of ultraviolet rays.
The support plate is steadily rotating and it has been conveniently assembled on a sliding drawer allowing to position and to pick up easily the elements to be treated.

Technical Features
A5407 PHOTOPOL PRO
Hight: 300mm - Width: 280mm - Depth: 350mm 
Net and Gross Weight: 8,5Kg - 9,5Kg
Voltage: 230V - 50/60Hz (different voltage available on request) 
Absorption: 250W 
Rotating plate size: 100x100mm
Wavelenght range: 320-550 nm (peak at 470 nm) 

A5407V PHOTOPOL PRO VACUUM
Height: 300mm - Width: 280mm - Depth: 350mm
Net and Gross Weight: 10,5Kg - 12,5Kg 
Voltage: 230V - 50/60Hz (different voltage available on request) 
Absorption: 300W 
Rotating plate size: ∅ 95mm 
Wavelenght range: 320-550 nm (peak at 470 nm

Dentalfarm Idea with 2 Easy Tanks + W.A.FI.S

FINISHING MICROBLASTERS
Last generation microblasting unit featuring attractive design. IDEA is proposed under the standard configuration fitted with two disposable abrasive tanks (aluminium oxide or micro glassbeads) and can be further upgraded with two additional tanks.
The working chamber incorporates a specific compartment separated by a filtering grate where the disposable product is accumulated. The front viewing glass opens widely over the working area to assure a complete visibility.
Its unique ergonomic design allows to keep the correct posture thus assuring exceptional comfortable working conditions.
The built-in WAFIS filtering system assures the extraction and elimination of the very fine dust particles originated during the blasting process through the combined action of atomised water (Dentalfarm patent).

Technical Features
• Height 460 mm Width 450 mm Depth 400 mm at base – 500 mm overall
• Net and Gross weight 17,0 kg – 21,0 kg
• Voltage 230 V - 50 Hz (different tensions available on demand) 
• Absorption 120 W – 1,2 A 
• Lighting 42 LED circuit with electronic transformer 
• Dust filtering system W.A.FI.S. (Water Air Filtering System) , patented dust filtering system 
• WAFIS air consumption 50 l/min. at 4 BAR 
• Microblasting pressure min 1,5 BAR - max 6,0 BAR 
• Air consumption (⌀0,8mm) 15 l/min. at 2 BAR 
• Air consumption (⌀2,0mm) 120 l/min. at 4 BAR 
• Standard nozzles 1 x ⌀ 0,8 mm + 1 x ⌀ 1,2 mm in tungsten carbide 
• Abrasive grainsize min - max mesh 270 (50µ) – mesh 60 (250µ)

DentalFarm Sandblaster Base 3

ALL-IN-ONE BLASTING CENTERS
Complete ALL-IN-ONE blasting center 
BASE 3 is a sandblasting unit designed for devesting and finishing. Fitted with a powerful devesting recycle projector, a tank for aggressive corundum for the removal of investments, and two disposable microblasting modules for aluminum oxide powder or glass-microbeads.
The standard configuration is a ready to use unit, best-suited to meet your basic needs and it is fitted with the new LED white lighting system.
DENTALFARM has developed the so-called W.A.FI.S. (WATER AIR FILTERING SYSTEM), a patented solution which eliminates airborne dust thanks to the combined action of water and air pressure, in compliance with hygiene and safety regulations. The WAFIS system can be easily connected on the top left side of the machine and starts automatically when the sandblaster switches on.
DENTALFARM ranges also include PRO-3 and PRO-3 Shake suction units, which can be easily connected to any sandblasting machine.

Features
The main features of the machine are: the ergonomic layout of the working chamber, the safety of use, and the trouble-free structure of the mechanical installation. BASE 3 is equipped with useful accessories and ensures a fast, practical and accurate work. The unit consists of a devesting projector and of 2 EASY tanks, featuring a pressure discharge system and an instant stop of the blasting jet. 
The unit can thus operate with three different abrasive media.

Precautions
The sandblasting process originates toxic dust which must not be inhaled; for this reason,
it is absolutely forbidden to operate the machine if a proper suction system has not
been previously connected to the sandblaster.

Technical Features
• Recirculation blasting system: YES (devesting projector with Ø3.0mm nozzle)
• Microblasting tanks: two
• Heating system: NOT available
• Available nozzles (finishing): 0.8mm for grainsize 75 to 95µm; 1.2mm from 95 to 110µm; 0.5mm for 50µm; 2.0mm for 250µm.
• Optional connection to an electric extractor or to the WAFIS system
• Overall dimensions: 415x400x415mm
• Working pressure: 2.5 – 6.0 BAR (devesting) – 1.5 – 5.0 BAR (microblasting)