| |
Ivoclar Vivadent emax CAD Cerec inlab
IPS E.Max CAD CEREC/inLAB Impulse
For the efficient fabrication of full-contour restorations (Monolithic Solutions) with maximum strength and toughness. The Blocks are available in A–D and Bleach shades and can be processed in the CEREC® or inLab® System from Sirona.
They are optimally suitable for the monolithic fabrication of inlays, onlays, veneers, crowns and 3-unit bridges. Should esthetic charcterizations be necessary, they can be achieved with the staining or cut-back technique.
| | |
IPS_EMAX_CAD_CER_INL | | | | |
| | |
| | Ivoclar Vivadent e.max CAD Crystallization Shade
IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYST_SH |
| | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS® Object Fix Flow & IPS® Object Putty
Auxiliary firing pastes with different levels of viscosity to support allceramic restorations (particularly IPS e.max® CAD) during firing and crystallization. The pastes are used to stabilize and secure the restorations on the silicon nitride support pins or directly on the silicon nitride firing tray. The pastes are easy to apply and remove after the firing procedure.
| | |
IPS_OBJECT_FIX | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max CAD Crystall./Connect
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall Connect material
| | |
IPS_EMAX_CAD_CRYST_C | | | | |
| | |
| | Ivoclar Vivadent IPS Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications
- Crowns
- Inlays, onlays
- Veneers
Your Benefits
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
| ** Prices From R2282,09
| |
EMPRESS_CAD_CEREC | | |
|
|
| | |
| |
Ivoclar Vivadent Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options:
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications:
- Crowns
- Inlays, onlays
- Veneers
Your Benefits:
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
IPS Empress CAD is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to inc
| | |
EMPRESS_CAD_E4D | | |
|
|
| | |
| | Ivoclar Vivadent Equipment: Furnaces
Programat CS2
Programat S2 is a compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials using a temperature of up to 1600°C. Programat S2 is integrated into the Ivoclar Vivadent workflow , providing optimally coordinated processing steps and consistently high-quality results.
Until recently, these processes would usually have taken five to eight hours to complete. Now, Programat S2 reduces the time required for sintering an IPS e.max ZirCAD crown coping to about 75 minutes[1]. With the Programat Dosto tray, approx. 40 single crowns can now be sintered at the same time in a single firing process, instead of only 25 as before.
Modern design and intuitive operation
- Optimized firing tray for more space and better cooling
- New membrane-sealed keypad with proven colour touchscreen display
- Extension of OSD display to include the operating status “cooling”
- Efficient and reliable performance due to software optimizations
| | |
645986 | | | | |
| | |
| | Programat S2
Your modern expert for high sintering accuracy
- Modern design and intuitive operation
- Optimized cooling tray for more space and better cooling
- New membrane-sealed keypad with proven colour touchscreen display
- Extension of OSD display to include the operating status “cooling”
- Efficient and reliable performance due to software optimizations
Programat S2 is a compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials using a temperature of up to 1600°C. Programat S2 is integrated into the Ivoclar workflow , providing optimally coordinated processing steps and consistently high-quality results.
Your advantages at a glance:
- Short sintering times of just 75 minutes[1] for IPS e.max® ZirCAD copings
- Speed programs for full-contour IPS e.max ZirCAD restorations
- Compact, easy-to-maintain and lightweight device (29 kg)
| Discounted Price + R60 000 worth of e.max ZirCAD material FREE OF CHARGE!
| |
742032 | | | | |
| | |
| | Programat P310 G2 200-240V/50-60HZ
Your reliable partner for smart pressing procedures
Modern. Intuitive. Smart.
With the objective to meet the requirements of your dental laboratory. Proven technologies, such as the fully automatic press function (FPF), combined with new features - that is what makes the new Programat press furnace your reliable partner.
Innovative infrared technology (IRT) with integrated thermographic camera measures the exact temperature at the surface of the objects being fired and the investment ring. The Programat furnace automatically controls the pre-drying and closing process.
Modern design
- Dynamic colour concept
- Ergonomic shapes and forms
- Optimised cooling tray for more space and better cooling
High process reliability
- Fast and high-quality firing results due to infrared technology
- IoT function for free monthly equipment usage reports
- Pre-set programs and material groups
Intuitive operation
- New membrane-sealed keypad with proven colour touchscreen display
- New user interface featuring new symbols and icons
- Efficient and reliable performance due to software optimisations
Additional highlights
Fully automatic press function (FPF)
Due to the new patented and fully automatic press function (FPF), pressing is now even easier and more economical. All you need to do is put the investment ring into the furnace and press the start button - everything else is performed by the furnace itself.
Crack Detection System (CDS)
The Programat furnace features the Crack Detection System (CDS). This system identifies cracks in the investment ring at an early stage and reduces the pressure, if necessary. The press process ends in time to protect the restorations.
Automatic double-range temperature calibration (ATK2)
The ATK2 temperature checking system calibrates the temperature in the furnace fully automatically and accurately in two different temperature ranges. This ensures high-precision press and firing procedures and reproducible press and firing results with various types of materials (low- and high-fusing ceramics).
Convenient loading of the furnace chamber
Upon opening, the furnace head pivots upwards, and thus provides ample working space. As a result, the furnace chamber can be loaded easily and comfortably.
Software update via USB flash drive
It has never been easier to update your software: Simply plug in a USB flash drive containing the latest software version and press the “Software Update” button. The software is updated automatically.
Stand-by key to reduce power consumption
Efficient use of energy and responsible use of valuable resources: Ivoclar is committed to this goal. Therefore, our new Programat is equipped with the new Power Saving Technology. In the stand-by mode, the energy consumption of the furnace decreases by almost 40 percent. As a result, you save on electricity costs and help protect our environment. Look out for the “Power Saving Technology” label on the back of your device.
Only applicable for Ivoclar materials (according to the Instructions for Use)
| | |
747825 | | | | |
| | |
| | Programat P510 G2 200-240V/50-60HZ
Take note – the G2 generation is only applicable to the Ceramic- and Press Furnaces (combination) – and not the CS (Chairside furnaces for Dentists)
Programat P510 with infrared technology speeding up the firing process by up to 25 % and enhancing the firing results. 500 individual firing programs that are pre-set and divided into different materials groups. Designed for use with materials such as IPS e.max, IPS InLine, IPS d. SIGN and IPS Empress. User friendly with hi-resolution 7 touch screen and membrane sealed keypad to select desired program. Thermal imaging camera automatically controls the predrying and closing process. QTK2 muffle technology together with the SiC bottom reflector ensures even temperature distribution for optimum firing results.Remote diagnostics via data file or internet Multimedia functions, video player, mp3 player and photo viewer. LAN and USB ports, software updates can be downloaded from a USB flashdrive at any time. Power Fail Save System bridging short power interuptions of up to 10 seconds, without the program being aborted.
| | |
747827 | | | | |
| | |
| | Programat P710 G2 200-240V/50-60HZ
Take note – the G2 generation is only applicable to the Ceramic- and Press Furnaces (combination) – and not the CS (Chairside furnaces for Dentists)
The Programat P710 ceramic furnace features infrared technology that can speed up the firing process by 200 % while enhancing the results as the thermal imaging camera controls the pre-drying and closing processes by measuring the temperature at the surface of objects being fired. Software calculates the most suitable times for these functions which can reduce ceramic cracking, while providing highly cost effective firing. A Digital Shade Assistant software application helps identify the ideal shade for the restoration, while the touchscreen is capable if viewing PDFs.
| | |
747829 | | | | |
| | |
| | Programat EP3010 G2 200-240V/50-60HZ
Your reliable partner for smart pressing procedures
Modern. Intuitive. Smart.
With the objective to meet the requirements of your dental laboratory. Proven technologies, such as the fully automatic press function (FPF), combined with new features - that is what makes the new Programat press furnace your reliable partner.
Modern design
- Dynamic colour concept
- Ergonomic shapes and forms
- Optimized cooling tray for more space and better cooling
High process reliability
- Fast and high-quality firing results due to infrared technology
- Pre-set programs and material groups
- IoT function for free monthly equipment usage reports
Intuitive operation
- New membrane-sealed keypad with proven colour touchscreen display
- New user interface featuring new symbols and icons
- Efficient and reliable performance due to software optimizations
Additional highlights
- Fully automatic press function (FPF)
Due to the new patented and fully automatic press function (FPF), pressing is now even easier and more economical. All you need to do is put the investment ring into the furnace and press the start button - everything else is performed by the furnace itself
- Crack Detection System (CDS)
The Programat furnace features the Crack Detection System (CDS). This system identifies cracks in the investment ring at an early stage and reduces the pressure, if necessary. The press process ends in time to protect the restorations.
- Automatic double-range temperature calibration (ATK2)
The ATK2 temperature checking system calibrates the temperature in the furnace fully automatically and accurately in two different temperature ranges. This ensures high-precision press and firing procedures and reproducible press and firing results with various types of materials (low- and high-fusing ceramics).
- Convenient loading of the furnace chamber
Upon opening, the furnace head pivots upwards, and thus provides ample working space. As a result, the furnace chamber can be loaded easily and comfortably.
- Software update via USB flash drive
It has never been easier to update your software: Simply plug in a USB flash drive containing the latest software version and press the “Software Update” button. The software is updated automatically.
- Stand-by key to reduce power consumption
Efficient use of energy and responsible use of valuable resources: Ivoclar is committed to this goal. Therefore, our Programat is equipped with the Power Saving Technology. In the stand-by mode, the energy consumption of the furnace decreases by almost 40 percent. As a result, you save on electricity costs and help protect our environment. Look out for the “Power Saving Technology” label on the back of your device.
| | |
747831 | | | | |
| | |
| | Programat EP5010 G2 200-240V/50-60HZ
Take note – the G2 generation is only applicable to the Ceramic- and Press Furnaces (combination) – and not the CS (Chairside furnaces for Dentists)
| | |
747833 | | | | |
| | |
| | Ivoclar Vivadent Equipment: Programat Accessories
ATK2 Automatic Temperature Checking Set 2
The automatic temperature checking set “ATK2“ is used to check and adjust the firing temperatures in furnaces with automatic calibration programs for the ATK2 system (e.g. Programat P500, P510, P700, P710, EP5000, EP5010). The simultaneous double-range calibration is a special feature of the ATK2.
| | |
598833 | | | | |
| | |
| | Ivoclar Vivadent: Programat Accessories
Investment Ring Cooling Rack
The cooling grid for the investment ring, which has been specifically developed for the Press technique, enables selective and optimum cooling.
| | |
559758 | | | | |
| | |
| | Ivoclar Vivadent Equipment:Programat Accessories
Programat Firing Tray Kit
This large honeycomb tray can be used for IPS Empress CAD restorations. Support pins can be mounted on the tray when needed.
Presentation:
- 1 tray
- 4 metal pins A
- 4 metallic pins B
- 4 metal pins C
| | |
598642 | | | | |
| | |
| | Ivoclar Vivadent Equipment: Programat Accessories
Programat Firing Tray Metal Pins A, B,C
The support pins can be used for the Programat firing tray and can be mounted to the honeycomb firing tray if required.
| | |
626698 | | | | |
| | |
| | Ivoclar Vivadent: Programat Accessories
Programat Tong Holder
The Programat tong holder can be mounted to the Programat housing and permits convenient placement of the firing tongs.
For Programat:
- P300
- P500
- P700
- EP3000
- EP5000
| | |
607538 | | | | |
| | |
| | Ivoclar Vivadent: Programat Accessories
Programat Furnace Tong
These furnace tongs are used to place objects in the firing chamber. High precision and excellent material quality are the special features of these tongs.
| | |
530665 | | | | |
| | |
| | Equipment: Programat Firing Furnaces
Temperature Checking Set 2
The temperature checking set is used to check and adjust the temperature in the Programat furnace chamber.
| | |
544903 | | | | |
| | |
| | IPS UniTray
Universal firing tray on which objects to be fired or press ingots can be placed on both sides.
| | |
602231 | | | | |
| | |
| | Ivoclar Vivadent SRL Gilvest
Gilvest HS Investment
Investment for crown and bridgework for all alloys and pressable ceramic, for use in speed and overnight technique.
Click Here To Download The Safety Data Sheet
| | |
SRL5968937 | | | | |
| | |
| | SRL Gilvest
Gialloy PA
Non-Precious Cobalt Based Dental Casting Alloy For Partial Framework Type 5 (Nickel and Beryllium Free)
Click Here To Download The Safety Data Sheet
| | |
SRL5890001 | | | | |
| | |
| | | | |
IV9601000 | | | | |
| | |
