| | Dentalfarm Hydrovap Semi-Automatic System Cleaner
Steam cleaner featuring a large capacity stainless steel boiler, perfectly insulated and fitted with external resistance, a solution avoiding the corrosive action of limescale.
The water filling is activated by pressing the white button placed on the left of the frontal panel and can be operated during the daily use without waiting for the boiler to cool down. By pressing the white button the water is picked up from an external tank. In such a way, small quantities of cold water can be poured in, thus preventing the internal temperature to fall down. The operator must only pay proper attention not to exceed the maximum water level (as per the manual version).
This new model allows the optional connection to the water mains, a solution that can be chosen at the moment of the installation.
Steam is delivered through a spraying gun with adjustable flow.
Working pressure is set at 6 BAR and water temperature reaches 155°C, parameters assuring complete degreasing action and deep cleaning of any surface.
Technical Features
• Feeding Tension 230V AC
• Fuses 10 Amp
• Absorbed Power 1500 W
• Rated Current 5.8 Amp
• Tension on controls 24 V
• Boiler total volume 4.9 l
• Water Capacity 2.0 l
• External spare water capacity 5.0 l
• Water temperature 155 *C
• Pressure 6 BAR
• Time necessary to attain the steam temperature 10-12 min
• Overall dimensions mm 330x350x350h
• Weight (net /gross) kg 13.5 / 15.0
| | |
DFA2103P |
| | |
| | Dentalfarm Ideastudio Sandblaster
ALL-IN-ONE FINISHING UNIT FOR THE DENTAL CLINIC
BOX in methacrylate fitted with easy-to-replace transparent protection screen with a grid at the bottom allowing to separate grinding debris including a microblasting TANK assembled on stainless steel support, instant stop thanks to the EASY module; filter, pressure reducer and pressure gauge, pneumatic foot-control + a constant pneumatic SUCTION system to eliminate the fine dust produced by aluminum oxide.
Applications
ideally suited for the preparation of the retention wall for fixed prosthesis, before cementation
– finishing for CAD-CAM milled elements.
Installation
Ideastudio DOES NOT need any electric connection, only a pneumatic connection.
Precautions
It has been noticed that where extensive use of alcohol-based products is being used to disinfect surfaces small, irreversible cracks are formed on the plexiglass (polymethylmethacrylate).
Please be careful to avoid damaging the product.
Technical Features
• Nozzle: 1 per Ø 0,8 mm (Ø 1,2 upon request)
• Abrasive media: AL2O3150 (95μ) – AL2O3180 (85μ) – Microblast 90μ upon request, with Ø 1,2 nozzle: AL2O3120 (105μ)
• Suction System: pneumatic (Venturi)
• Filtration: Dry System (with cloth bag)
• Working Pressure: 2,0-4,0 BAR
• Dimensions: mm 280x320x300h
• Net Weight: 5,0 Kg
| | |
DFA1066+DFA1067 |
| | |
| | Dentalfarm Photopol Pro: LED Light-Curing Unit
UV LIGHT-CURING UNIT FOR COMPOSITES
Photopol PRO is a multi-purpose light-curing furnace which best suits with most composites sensitive to UV light.
Three extremely powerful circuits à 8 LED UV at different frequency assure the overall radiation.
The distinctive feature of each individual LED is a specific collimation lens focusing the light (therefore the emitted power) in a very restricted angle of incidence.
Both the working chamber and the horizontal plane are coated with highly reflecting material assuring a mirror effect with no dispersion of ultraviolet rays.
The support plate is steadily rotating and it has been conveniently assembled on a sliding drawer allowing to position and to pick up easily the elements to be treated.
Technical Features
A5407 PHOTOPOL PRO
Hight: 300mm - Width: 280mm - Depth: 350mm
Net and Gross Weight: 8,5Kg - 9,5Kg
Voltage: 230V - 50/60Hz (different voltage available on request)
Absorption: 250W
Rotating plate size: 100x100mm
Wavelenght range: 320-550 nm (peak at 470 nm)
A5407V PHOTOPOL PRO VACUUM
Height: 300mm - Width: 280mm - Depth: 350mm
Net and Gross Weight: 10,5Kg - 12,5Kg
Voltage: 230V - 50/60Hz (different voltage available on request)
Absorption: 300W
Rotating plate size: ∅ 95mm
Wavelenght range: 320-550 nm (peak at 470 nm
| | |
DFA5407 |
| | |
| | Dentalfarm Photopol Pro: LED Light-Curing Unit
UV LIGHT-CURING UNIT FOR COMPOSITES
Photopol PRO is a multi-purpose light-curing furnace which best suits with most composites sensitive to UV light.
Three extremely powerful circuits à 8 LED UV at different frequency assure the overall radiation.
The distinctive feature of each individual LED is a specific collimation lens focusing the light (therefore the emitted power) in a very restricted angle of incidence.
Both the working chamber and the horizontal plane are coated with highly reflecting material assuring a mirror effect with no dispersion of ultraviolet rays.
The support plate is steadily rotating and it has been conveniently assembled on a sliding drawer allowing to position and to pick up easily the elements to be treated.
Technical Features
A5407 PHOTOPOL PRO
Hight: 300mm - Width: 280mm - Depth: 350mm
Net and Gross Weight: 8,5Kg - 9,5Kg
Voltage: 230V - 50/60Hz (different voltage available on request)
Absorption: 250W
Rotating plate size: 100x100mm
Wavelenght range: 320-550 nm (peak at 470 nm)
A5407V PHOTOPOL PRO VACUUM
Height: 300mm - Width: 280mm - Depth: 350mm
Net and Gross Weight: 10,5Kg - 12,5Kg
Voltage: 230V - 50/60Hz (different voltage available on request)
Absorption: 300W
Rotating plate size: ∅ 95mm
Wavelenght range: 320-550 nm (peak at 470 nm
| | |
DFA5407V |
| | |
