| | IPS Ceramic Separating Liquid with Brush 15ml
This Separating Liquid is used on areas that have been sealed with either the Model Sealer or the Margin Sealer Liquid. Use of this liquid will ensure a clean separation between the ceramic material and the stone model and/or die.
| | |
593403 | | | | | |
| | |
| | Ivodent Online
IPS e.matrix
The patented multi-holder IPS e.matrix for PM3/5/7 allows up to six blocks to be processed in the grinding sequence , depending on the block size. IPS e.matrix for PM3/5/7 can be easily removed from the materials magazine and can be conveniently loaded outside the unit. The multi-holder is ideally adapted to the PrograMill machining strategies.
| | |
689241 | | | | | |
| | |
| | Ivoclar Vivadent emax Press
IPS e.max Alox Plunger
The IPS e.max Alox Plunger features ends that are both rounded which makes both sides suitable for pressing.
| | |
597062 | | | | | |
| | |
| | Ivoclar Vivadent e.max Press
IPS e.max ALOX PLUNGER SEPARATOR
The porcelain block and alumina push rod are separated in the casting and cooling process so that the porcelain blocks adhering to the push rod can be easily removed.
| | |
597063 | | | | | |
| | |
| |
Ivoclar Vivadent emax CAD Cerec inlab
IPS E.Max CAD CEREC/inLAB Impulse
For the efficient fabrication of full-contour restorations (Monolithic Solutions) with maximum strength and toughness. The Blocks are available in A–D and Bleach shades and can be processed in the CEREC® or inLab® System from Sirona.
They are optimally suitable for the monolithic fabrication of inlays, onlays, veneers, crowns and 3-unit bridges. Should esthetic charcterizations be necessary, they can be achieved with the staining or cut-back technique.
| | |
IPS_EMAX_CAD_CER_INL | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max CAD Crystall./Connect
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall Connect material
| | |
IPS_EMAX_CAD_CRYST_C | | | | | |
| | |
| |
IPS e.max CAD Crystall Stains Refill
Intensive stains in paste form for the reproduction of natural characteristics. They are optimally coordinated for use with IPS e.max CAD.
| | |
IPS_EMAX_CAD_CRYST_S |
| | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization
IPS e.max CAD Crystall./Add-On 5g Dentin
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
| | |
635549 | | | | | |
| | |
| | IPS e.max CAD Crystall/Add-On 5g Dentin
IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.
- Dentin is used to add on to a crown should the interproximal contacts be short
- Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
| | |
605365 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max® CAD Crystall./ Add-On, Liquid
For adjustments, such as in incisal/occlusal or dentin areas. These adjustments can be made directly with the crystallization firing or in a subsequent corrective firing cycle.
| | |
605569 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Liquid
IPS e.max® CAD Crystall./ Glaze Liquid
Special liquid to dilute IPS e.max® CAD Crystall./Shades and Stains and the IPS e.max CAD Crystall./Glaze Paste.
| | |
605366 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Paste
IPS e.max® CAD Crystall Glaze Paste
Special glaze paste to be used with fully anatomical IPS e.max® CAD restorations. It may be applied either prior to crystallization on the "blue" crown or in the subsequent firing cycle.
| | |
605363 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Glaze Spray
IPS e.max® CAD Crystall Glaze Spray
This is used with fully anatomical IPS e.max® CAD restorations. It is sprayed on the restorations once IPS e.max CAD. Crystall./Shades and Stains have been applied. Subsequently, the restorations are fired in a combined crystallization and glaze firing cycle.
| | |
605364 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max CAD Crystallization Pin XS
The crystallization pins are required for the crystallization of fully anatomical, milled IPS e.max CAD restorations. This firing tray must not be used to fire IPS e.max Ceram.
| | |
656105 | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max CAD Crystallization Pins
The crystallization pins are required for the crystallization of fully anatomical, milled IPS e.max CAD restorations. This firing tray must not be used to fire IPS e.max Ceram.
| | |
605368 | | | | | |
| | |
| | Ivoclar Vivadent e.max CAD Crystallization Shade
IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYST_SH |
| | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Stains
IPS e.max® CAD Crystall./Stains
Intensive stains in paste form that are optimally coordinated for use with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYSTST | | | |
| |
| | |
| | Ivoclar Vivadent emax CAD Crystal
IPS e.max® CAD Crystallization Tray, Pins
Silicon nitride firing tray for the crystallization of IPS e.max® CAD restorations. The crystallization pins supplied are required for the crystallization of IPS e.max CAD LT restorations.
| | |
605367 | | | | | |
| | |
| |
IPS e.max CAD CER/inLab MO A14 (S) x 5
IPS e.max CAD is an innovative lithium disilicate glass-ceramic for CAD/CAM applications. This unrivalled material combines highly esthetic qualities with exceptional user-friendliness. Unlike other CAD/CAM materials, IPS e.max CAD covers a comprehensive spectrum of indications. A wide range of translucency levels, shades and block sizes offer greater flexibility for challenging clinical situations. Tried-and-tested cementation materials have been specifically designed to complement IPS e.max CAD to provide long lasting and durable restorations.
| | |
IPS_EMAX_CAD_INLA_MO | | | | | |
| | |
| | Ivodent Online
IPS E.max CAD for PrograMill
IPS e.max CAD is the versatile and reliable lithium disilicate glass-ceramic for CAD/CAM applications in the dental laboratory and the dental practice. It is indicated for single-tooth restorations and 3-unit bridges (premolar region). Its expressive esthetics and the high strength (530 MPa*) in addition to the sound clinical evidence allow strong and esthetic restorations to be fabricated. After wet processing in a PrograMill machine, the restorations are crystallized. Subsequently, they are either polished, characterized with stains or veneered with layering materials.
| | |
EMAX_CAD_FOR_PROGRAMILL |
| | | |
|
| | |
| | Ivoclar Vivadent emax Ceram
IPS e.max Ceram Add-On
IPS e.max Ceram Add-On materials are available in four shades. Depending on the application, users may select between a Bleach, Margin, Dentin and Incisal shade and opacity. The shaded add-on materials further facilitate adjustments.
| | |
597048 | | | | | |
| | |
| | IPS e.max Ceram Add-On 20g
IPS e.max Ceram Add-On materials are available in four shades. Depending on the application, users may select between a Bleach, Margin, Dentin and Incisal shade and opacity. The shaded add-on materials further facilitate adjustments.
| | |
597049 | | | | | |
| | |
| | | | |
602463 | | | | | |
| | |
| | Ivoclar Vivadent emax Ceram
IPS e.max Ceram Cervical Transpa
With the shaded Cervical Transparent materials, a life-like in-depth effect is achieved in the cervical third.
| | |
CERAM_CERV_TRANSPA | | | | | |
| | |
