CADCAM

Ivoclar Vivadent e.max CAD

IPS e.max® CAD is a high-strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside).

The IPS e.max CAD blocks for chairside processing are available in 16 A-D and four modern Bleach BL shades. They are available in two levels of translucency and two sizes. There are also an even more opaque blocks for the fabrication of frameworks (layering technique) in the laboratory.

The IPS e.max CAD blocks with high translucency (HT) are used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers. For partial crowns and crowns, the less translucent (LT) blocks are used. The restorations are directly milled from the blue blocks. During a quick combined crystallization/glaze firing cycle, which supersedes polishing, the restorations acquire their high strength (360 MPa) and the desired esthetic properties (tooth shade, translucency, brightness).

The restorations can be additionally individualized using the Stain materials. Finally, the restorations are seated. As an alternative to being placed using the adhesive cementation technique, crowns may also be cemented self-adhesively or conventionally.

Tetric CAD for CEREC

Tetric CAD for CEREC / inLab MT C14 / 5 A1

Tetric CAD is an aesthetic composite block for the efficient fabrication of indirect single-tooth restorations by means of the CAD/CAM technology. Tetric CAD is based on the proven Tetric technology and is the digital supplement to the direct restoratives of the Tetric Evo-Line.

Due to the pronounced chameleon effect, Tetric CAD restorations blend in with the residual tooth structure in an optically pleasing manner.

The restoration is polished after milling and then seated using an adhesive cementation protocol. This processing technique is very efficient and leads to an aesthetic result quickly and easily.

Ivodent Vivadent e.max ZirCAD MT & LT

IPS e.max ZirCAD

IPS e.max ZirCAD is the innovative and versatile zirconium oxide.

IPS e.max ZirCAD is the material of choice for cases in which high mechanical stability, thin restoration walls and natural-looking esthetics are of the essence. It is exactly with regard to these aspects that the IPS e.max zirconium oxide portfolio sets new standards. Restorations with considerably reduced wall thicknesses can be created as the material provides both high strength, ranging from 850 to 1,200 MPa¹, and high fracture toughness. A trade-off in translucency is not required.

A finely honed balance between low wall thickness and optimum translucency allows the fabrication of restorations that are tooth preserving and natural looking.

IPS e.max ZirCAD MT:
IPS e.max ZirCAD MT is the creative one in the portfolio. The material combines sound mechanical stability (850 MPa1) with impressive esthetic properties as a result of an optimized raw material mixture. It lends itself to various processing options and offers a high degree of flexibility. The A–D shade system enables an efficient fabrication of esthetic monolithic or layered restorations. The A–D Colouring and Effect Colouring Liquids are designed for maximum customization prior to sintering.

Indications:

• Crowns
• Three-unit bridges
• Implant-supported superstructures

IPS e.max ZirCAD LT:
IPS e.max ZirCAD LT is the allrounder in the portfolio. The material combines high mechanical stability (1,200 MPa1) with pleasing esthetics. These properties make IPS e.max ZirCAD LT suitable for the fabrication of minimally invasive single-tooth restorations and stable multi-unit framework structures. Implant-supported superstructures supplement the offering. Restorations can be produced using a variety of techniques: monolithic method, infiltration, partial veneering and complete veneering.

Indications:

• Monolithic crowns
• Monolithic bridges with three or more units
• Implant-supported superstructures
• Framework structures with three or more units
• Framework structures with crowns
• Implant-supported superstructures

Ivoclar Vivadent IPS Empress CAD

IPS Empress CAD

This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.

A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.

Processing Options

Once produced, restorations can be:

• polished
• stained (optional) – glazed

Indications

• Crowns
• Inlays, onlays
• Veneers

Your Benefits

• Highly esthetic restorations, efficiently created
• Clinically proven ceramic material with a flexural strength of 185 MPa*
• Optimum shade adjustment to the natural tooth structure due to the chameleon effect

Ivoclar Vivadent e.max CAD Crystallization Shade

IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.

Ivoclar Vivadent emax ZirCAD inlab

IPS e.max® CAD for CEREC® and inLab®

IPS e.max ZirCAD Blocks are available in nine sizes and five shades. They are processed in the inLab System from Sirconia. Given their high strength and homogeneous shading, they are excellently suitable for the fabrication of esthetic crown and bridge frameworks. Moreover, IPS e.max ZirCAD convinces users with the option of quick sintering in the Programat S1. The frameworks represent the optimum shade base for manual veneering using IPS e.max Ceram, for veneering by means of the press-on technique with IPS e.max ZirPress and, above all, for digital veneering with IPS e.max CAD.

Ivoclar Vivadent Telio System

Telio CAD

Telio CAD consists of acrylate polymer (PMMA) blocks for the fabrication of long-term temporaries using CAD/CAM technology.

Telio CAD provides a long-term provisional solution for CAD/CAM applications. This material is available via fabrication in-house utilizing authorized chairside design/milling systems. The restorations can be polished quickly and efficiently or they can be characterized with stains. Furthermore, incisal areas may be customized with light-curing layering materials or Telio Lab materials to attain highly esthetic results. Telio CAD blocks can be milled in the Ivoclar Vivadent PrograMill One, the CEREC System (Sirona) and Planmeca FIT System (E4D Technologies).

Telio CAD - the highlights:

• Long-term (12-month) wear period
• Durable shade stability and lifelike fluorescence
• 6 shades (BL3, A1, A2, A3, A3.5 and B1)
• Telio CAD blocks are available in 2 bridge sizes (B40L, B55)
• High material homogeneity due to industrial manufacturing process
• Temporaries can be easily reproduced.

Indications:

• Temporary anterior and posterior crowns
• Temporary anterior and posterior bridges with up to 2 pontics
• Temporary restorations on implants 
• Therapeutic restorations to correct TMJ problems and occlusal adjustments

Additional Telio CAD Applications Telio CAD Abutment Solutions:

Telio CAD offers individual implant-supported restorations for the temporary treatment period. The Telio CAD A16 is used for the CAD/CAM-supported fabrication of temporary implant-supported hybrid abutment crowns for individual temporary single-tooth restorations. The homogeneous, highly cross-linked PMMA blocks feature a prefabricated interface of size S or L for the direct cementation onto the Ti base from Sirona.

Hybrid abutment crowns made of Telio CAD A16 combine abutment and monolithic crown in a 2-in-1 solution.

They are used after the insertion of the implant and before the placement of the permanent restoration made of IPS e.max CAD. Shape, esthetics and emergence profile can be easily adapted at any time. Telio CAD A16 thus represents the basis for the subsequent permanent restoration with IPS e.max CAD and IPS e.max Press Abutment Solutions.

Advantages:

• Immediate load-bearing ability when cemented to a titanium base or after the healing phase
• Easy design of the emergence profile
• Visualization of the permanent restorative solution
• Blocks are available in size A16 and six LT shades (BL3, A1, A2, A3, A3.5, B1)