IVOdeals

Ivodent Online Tetric N

Tetric N-Ceram

Tetric® N-Ceram is a light-curing, radiopaque nano-hybrid composite 

Advantages:

For restorative treatment. Available in syringes and cavifils.

Indications:

•  Universal use – for anterior and posterior restorations
•  Excellent radiopacity
•  Good polishability
•  Nano-fillers complete the finely tuned filler technology
•  Nano-colour pigments are responsible for the material’s unique chameleon effect.
•  The nano-modifier ensures optimum stability and excellent sculptability
•  The material does not stick to the instruments

Ivoclar Vivadent Variolink

Variolink Esthetic DC Refill 1 x 5g

Variolink Esthetic is a light- and dual-curing luting composite for the esthetic and permanent cementation of ceramic and composite resin restorations. This material represents the next generation of the well-established, esthetic cements Variolink II and Variolink Veneer.

Indications:

Variolink Esthetic DC

• Permanent cementation of glass-ceramic, lithium disilicate glassceramic and composite restorations (inlays, onlays, partial crowns, crowns, bridges)

Advantages:

• Excellent shade stability thanks to the patented and reactive light initiator Ivocerin which is 100% amine-free
• Balanced and straightforward Effect shade system
• Lifelike fluorescence
• Easy, precise excess removal
• Flexible, situational consistency – ideal combination of flowability and stability
• Impressive radiodiagnostics

Shades:

• Light+, Light, Neutral, Warm, Warm+ and White Opaque

Contains:

• Variolink Esthetic Syringe DC 1x 5g
• Mixing Tips 15x

Ivoclar Vivadent e.max CAD Cerec

Lithium disilicate (LS₂) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results.

Years of clinical experience:
The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained.

Patients with devitalized teeth:
Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance.

Indications:

• Veneers (≥ 0.3 mm)
• Inlays and onlays
• Occlusal veneers, partial crowns
• Minimally invasive crowns (≥ 1 mm)
• Implant superstructures
• Hybrid abutment solutions
• Three-unit bridges up to the second premolar as the terminal abutment

Advantages:

• Excellent esthetics and high strength (500 MPa*)
• Versatile applications and extensive indication range
• Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm
• Clinical long-term success and scientifically documented results
• Natural-looking esthetics irrespective of the preparation shade
• Adhesive, self-adhesive or conventional cementation depending on the indication

Prices range from R3 522.93 excl VAT

Ivoclar Vivadent emax Press

IPS e.max Press

IPS e.max Press are lithium disilicate glass-ceramic ingots for the press technique.

The innovative IPS e.max Press lithium disilicate glass-ceramic (LS2) offers excellent fit, form and function combined with high strength of 500 MPa. The material is supplied in seven levels of translucency and ingot two sizes. The resulting restorations exhibit lifelike esthetics, regardless of the clinical situation.

IPS e.max Press is used to produce single-tooth restorations, bridges for the anterior and premolar region, inlays, onlay, implant superstructures and custom implant abutments.

A wide selection of ingots are available from which users can choose to suit their preferred processing technique (staining, cut-back or layering technique) and clinical demands. The restorations are characterized or veneered with coordinated staining materials or layering ceramic from the IPS e.max Ceram assortment. Materials intended for full-contour restorations are available in 16 A-D and four Bleach BL shades. The substructure materials for the layering technique are supplied in varing levels of chromatic shades.

Available ingots:

Multi ingots

These polychromatic and polytranslucent ingots provide a natural shade progression from the margin to the incisal edge, and enable technicians to achieve a strong and highly esthetic restoration without needing to cutback and layer.

HT ingots

The high translucency ingots (HT) are ideal for the fabrication of minimally invasive full-contour restorations, such as inlays, onlays and veneers. The restorations can then be characterized with staining materials in the IPS e.max Ceram line.

MT ingots

The medium translucency ingots (MT) are perfect for a variety of indications from thin veneers to 3-unit bridges and are ideal for restorations requiring a higher brightness level than HT and more translucency than LT.

LT ingots

Full-contour partial crowns and crowns are fabricated beautifully with the low translucency ingots (LT). In the anterior region in particular, the esthetic appearance of the restorations is maximized by employing the cut-back technique.

MO ingots

The medium opacity ingots (MO) are used to fabricate substructures for vital or slightly discolored teeth. They create an ideal basis for lifelike restorations completed with the layering technique.

HO ingots

In cases where the prepared tooth structure is discolored or titanium abutments are used, the HO ingots mask the dark background to achieve highly esthetic results.

Impulse Opal ingots

The best option for enamel replacement. Restorations fabricated with these ingots exude exceptionally opalescent properties making them ideal for (thin) veneers with light teeth requiring an opalescent effect.

Ivodent Vivadent e.max ZirCAD MT & LT

IPS e.max ZirCAD

IPS e.max ZirCAD is the innovative and versatile zirconium oxide.

IPS e.max ZirCAD is the material of choice for cases in which high mechanical stability, thin restoration walls and natural-looking esthetics are of the essence. It is exactly with regard to these aspects that the IPS e.max zirconium oxide portfolio sets new standards. Restorations with considerably reduced wall thicknesses can be created as the material provides both high strength, ranging from 850 to 1,200 MPa¹, and high fracture toughness. A trade-off in translucency is not required.

A finely honed balance between low wall thickness and optimum translucency allows the fabrication of restorations that are tooth preserving and natural looking.

IPS e.max ZirCAD MT:
IPS e.max ZirCAD MT is the creative one in the portfolio. The material combines sound mechanical stability (850 MPa1) with impressive esthetic properties as a result of an optimized raw material mixture. It lends itself to various processing options and offers a high degree of flexibility. The A–D shade system enables an efficient fabrication of esthetic monolithic or layered restorations. The A–D Colouring and Effect Colouring Liquids are designed for maximum customization prior to sintering.

Indications:

• Crowns
• Three-unit bridges
• Implant-supported superstructures

IPS e.max ZirCAD LT:
IPS e.max ZirCAD LT is the allrounder in the portfolio. The material combines high mechanical stability (1,200 MPa1) with pleasing esthetics. These properties make IPS e.max ZirCAD LT suitable for the fabrication of minimally invasive single-tooth restorations and stable multi-unit framework structures. Implant-supported superstructures supplement the offering. Restorations can be produced using a variety of techniques: monolithic method, infiltration, partial veneering and complete veneering.

Indications:

• Monolithic crowns
• Monolithic bridges with three or more units
• Implant-supported superstructures
• Framework structures with three or more units
• Framework structures with crowns
• Implant-supported superstructures

IPS e.max ZirCAD for Cerec/inLab

IPS e.max ZirCAD for Cerec/inLab LT C17

IPS e.max ZirCAD LT are pre-shaded, monochromatic zirconium oxide blocks suitable for use in the dental laboratory and the dental practice. They are used to fabricate full-contour crowns and 3-unit bridges. The high strength of 1.200 Mpa* allows low wall thickness (posterior crowns 0.6mm, anterior crowns 0.4mm) and tooth-preserving preparation. After wet processing in the PrograMill One, the restorations are sintered e.g. Programat  CS4. For glazing, the fluorescent IPS e.max CAD Crystall/Glaze Paste Fluo is available. Optionally, the restorations can be characterized using IPS e.max CAD Crystall/Shades and Stains. IPS e.max ZirCAD restorations are cemented with e.g. SpeedCEM Plus.