Ivoclar Vivadent e.max CAD Cerec

Lithium disilicate (LS₂) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results.

Years of clinical experience:
The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained.

Patients with devitalized teeth:
Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance.

Indications:

• Veneers (≥ 0.3 mm)
• Inlays and onlays
• Occlusal veneers, partial crowns
• Minimally invasive crowns (≥ 1 mm)
• Implant superstructures
• Hybrid abutment solutions
• Three-unit bridges up to the second premolar as the terminal abutment

Advantages:

• Excellent esthetics and high strength (500 MPa*)
• Versatile applications and extensive indication range
• Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm
• Clinical long-term success and scientifically documented results
• Natural-looking esthetics irrespective of the preparation shade
• Adhesive, self-adhesive or conventional cementation depending on the indication

Prices range from R3 522.93 excl VAT

Ivoclar Vivadent emax Press

IPS e.max Press

IPS e.max Press are lithium disilicate glass-ceramic ingots for the press technique.

The innovative IPS e.max Press lithium disilicate glass-ceramic (LS2) offers excellent fit, form and function combined with high strength of 500 MPa. The material is supplied in seven levels of translucency and ingot two sizes. The resulting restorations exhibit lifelike esthetics, regardless of the clinical situation.

IPS e.max Press is used to produce single-tooth restorations, bridges for the anterior and premolar region, inlays, onlay, implant superstructures and custom implant abutments.

A wide selection of ingots are available from which users can choose to suit their preferred processing technique (staining, cut-back or layering technique) and clinical demands. The restorations are characterized or veneered with coordinated staining materials or layering ceramic from the IPS e.max Ceram assortment. Materials intended for full-contour restorations are available in 16 A-D and four Bleach BL shades. The substructure materials for the layering technique are supplied in varing levels of chromatic shades.

Available ingots:

Multi ingots

These polychromatic and polytranslucent ingots provide a natural shade progression from the margin to the incisal edge, and enable technicians to achieve a strong and highly esthetic restoration without needing to cutback and layer.

HT ingots

The high translucency ingots (HT) are ideal for the fabrication of minimally invasive full-contour restorations, such as inlays, onlays and veneers. The restorations can then be characterized with staining materials in the IPS e.max Ceram line.

MT ingots

The medium translucency ingots (MT) are perfect for a variety of indications from thin veneers to 3-unit bridges and are ideal for restorations requiring a higher brightness level than HT and more translucency than LT.

LT ingots

Full-contour partial crowns and crowns are fabricated beautifully with the low translucency ingots (LT). In the anterior region in particular, the esthetic appearance of the restorations is maximized by employing the cut-back technique.

MO ingots

The medium opacity ingots (MO) are used to fabricate substructures for vital or slightly discolored teeth. They create an ideal basis for lifelike restorations completed with the layering technique.

HO ingots

In cases where the prepared tooth structure is discolored or titanium abutments are used, the HO ingots mask the dark background to achieve highly esthetic results.

Impulse Opal ingots

The best option for enamel replacement. Restorations fabricated with these ingots exude exceptionally opalescent properties making them ideal for (thin) veneers with light teeth requiring an opalescent effect.

IPS e.max CAD CER/inLab MO A14 (S) x 5

IPS e.max CAD is an innovative lithium disilicate glass-ceramic for CAD/CAM applications. This unrivalled material combines highly esthetic qualities with exceptional user-friendliness. Unlike other CAD/CAM materials, IPS e.max CAD covers a comprehensive spectrum of indications. A wide range of translucency levels, shades and block sizes offer greater flexibility for challenging clinical situations. Tried-and-tested cementation materials have been specifically designed to complement IPS e.max CAD to provide long lasting and durable restorations.

IPS e.max ZirCAD for Cerec/inLab

IPS e.max ZirCAD for Cerec/inLab LT C17

IPS e.max ZirCAD LT are pre-shaded, monochromatic zirconium oxide blocks suitable for use in the dental laboratory and the dental practice. They are used to fabricate full-contour crowns and 3-unit bridges. The high strength of 1.200 Mpa* allows low wall thickness (posterior crowns 0.6mm, anterior crowns 0.4mm) and tooth-preserving preparation. After wet processing in the PrograMill One, the restorations are sintered e.g. Programat  CS4. For glazing, the fluorescent IPS e.max CAD Crystall/Glaze Paste Fluo is available. Optionally, the restorations can be characterized using IPS e.max CAD Crystall/Shades and Stains. IPS e.max ZirCAD restorations are cemented with e.g. SpeedCEM Plus.

IPS e.max ZirCAD Prime

IPS e.max ZirCAD Prime delivers a superior level of quality and high-end esthetics in zirconium oxide restorations. Furthermore, optimized workflows enhance the efficiency and profitability of your dental lab. The Prime product family includes IPS e.max ZirCAD Prime and IPS e.max ZirCAD Prime Esthetic, which complement each other in terms of their material composition and their range of applications.

Exceptional esthetics

• High-quality restorations featuring a seamless internal progression of shade
• Precise shading of the material to match the desired A-D shade

Versatile areas of application

• IPS e.max ZirCAD Prime: from crowns to wide-span bridges
• IPS e.max ZirCAD Prime Esthetic: crowns and 3-unit bridges
• Accommodates all fabrication techniques: glazing, staining, cut-back, layering and infiltration

Gradient Technology: the highlight

• Unique manufacturing technology
• Lifelike esthetic appearance, high accuracy of fit and optimized translucency
• Intelligent disc design

Two products that complement each other to the max

• IPS e.max ZirCAD Prime is the all-round disc for a wide variety of applications and techniques
• IPS e.max ZirCAD Prime Esthetic is a specialist disc that allows natural-looking crowns to be created efficiently

KERA® Disc - Cobalt Chrome

NPM Cobalt-based dental milling alloy for metal-ceramic, type 4
• Optimised milling properties due to special heat treatment
• High strength due to homogeneous metal structure
• Suitable for all high fusing veneering ceramics

Indications:
• Crowns and bridges
• One piece abutments
• Implant retained suprastructures

SAGEMAX NexxZr PLUS MULTI 2.0 W-98

NexxZr+ Multi 2.0 is the successor to the highly esthetic NexxZr+ Multi with an improved formulation. NexxZr+ Multi 2.0 is a dental multilayer zirconium oxide (4Y-TZP cervical, 5Y-TZP incisal) with natural color and translucency gradient and high flexural strength (850 MPa cervical, 650 MPa incisal). These properties enable the fabrication of highly esthetic, monolithic single-tooth and bridge restorations in the anterior and posterior region. The specially adjusted translucency gradient ensures good coverage in the cervical area and increased translucency in the incisal area. The integrated color gradient also ensures the efficient fabrication of natural-looking restorations.
Flexural strength

• 650 MPa (incisal)
• 850 MPa (cervical)

Translucency

• 49 % (incisal)
• 45 % (cervical)

Processing techniques

• Infiltration technique
• Staining technique
• Cut-back technique

Shapes
W-98
Thicknesses
14 mm, 16 mm, 20 mm
Indications

• Single unit restorations (anterior / posterior)
• 3-unit bridges (anterior / posterior)
   

Highlights
1. Natural color gradient – Efficient fabrication of natural looking restorations
2. Specially adjusted translucency gradient – Good coverage in the cervical area and
increased translucency in the incisal area
3. High flexural strength - Single-unit restorations up to 3-unit bridges

Click Here To Download The Safety Data Sheet
Click Here For Instructions For Use
Click Here To Download The Flyer For More Information
Watch The Video Below For More Information: