Metal-FREE Ceramics IVODENT AFRICA

Ivoclar Vivadent e.max CAD Cerec

Lithium disilicate (LS₂) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results.

Years of clinical experience:
The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained.

Patients with devitalized teeth:
Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance.

Indications:

Veneers (≥ 0.3 mm)
Inlays and onlays
Occlusal veneers, partial crowns
Minimally invasive crowns (≥ 1 mm)
Implant superstructures
Hybrid abutment solutions
Three-unit bridges up to the second premolar as the terminal abutment

Advantages:

Excellent esthetics and high strength (500 MPa*)
Versatile applications and extensive indication range
Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm
Clinical long-term success and scientifically documented results
Natural-looking esthetics irrespective of the preparation shade
Adhesive, self-adhesive or conventional cementation depending on the indication

Prices range from R3 522.93 excl VAT

EMAX_CAD_CEREC

Ivoclar Vivadent e.max CAD

IPS e.max® CAD is a high-strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside).

The IPS e.max CAD blocks for chairside processing are available in 16 A-D and four modern Bleach BL shades. They are available in two levels of translucency and two sizes. There are also an even more opaque blocks for the fabrication of frameworks (layering technique) in the laboratory.

The IPS e.max CAD blocks with high translucency (HT) are used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers. For partial crowns and crowns, the less translucent (LT) blocks are used. The restorations are directly milled from the blue blocks. During a quick combined crystallization/glaze firing cycle, which supersedes polishing, the restorations acquire their high strength (360 MPa) and the desired esthetic properties (tooth shade, translucency, brightness).

The restorations can be additionally individualized using the Stain materials. Finally, the restorations are seated. As an alternative to being placed using the adhesive cementation technique, crowns may also be cemented self-adhesively or conventionally.

EMAX_CAD_E4D

Ivoclar Vivadent IPS Empress CAD

IPS Empress CAD

This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.

A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.

Processing Options

Once produced, restorations can be:

polished
stained (optional) – glazed

Indications

Crowns
Inlays, onlays
Veneers

Your Benefits

Highly esthetic restorations, efficiently created
Clinically proven ceramic material with a flexural strength of 185 MPa*
Optimum shade adjustment to the natural tooth structure due to the chameleon effect

** Prices From R2282,09

EMPRESS_CAD_CEREC

Ivoclar Vivadent Empress CAD

IPS Empress CAD

This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.

A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.

Processing Options:

Once produced, restorations can be:

polished
stained (optional) – glazed

Indications:

Crowns
Inlays, onlays
Veneers

Your Benefits:

Highly esthetic restorations, efficiently created
Clinically proven ceramic material with a flexural strength of 185 MPa*
Optimum shade adjustment to the natural tooth structure due to the chameleon effect

IPS Empress CAD is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.

A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to inc

EMPRESS_CAD_E4D

Ivoclar Vivadent emax CAD Cerec inlab

IPS E.Max CAD CEREC/inLAB Impulse

For the efficient fabrication of full-contour restorations (Monolithic Solutions) with maximum strength and toughness. The Blocks are available in A–D and Bleach shades and can be processed in the CEREC® or inLab® System from Sirona.

They are optimally suitable for the monolithic fabrication of inlays, onlays, veneers, crowns and 3-unit bridges. Should esthetic charcterizations be necessary, they can be achieved with the staining or cut-back technique.

IPS_EMAX_CAD_CER_INL

Ivoclar Vivadent emax CAD Crystal

IPS e.max CAD Crystall./Connect

IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.

Dentin is used to add on to a crown should the interproximal contacts be short
Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall Connect material

IPS_EMAX_CAD_CRYST_C

Ivoclar Vivadent e.max CAD Crystallization Shade

IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.

IPS_EMAX_CAD_CRYST_SH

IPS e.max Ceram Add-On 20g

IPS e.max Ceram Add-On materials are available in four shades. Depending on the application, users may select between a Bleach, Margin, Dentin and Incisal shade and opacity. The shaded add-on materials further facilitate adjustments.

597049

IPS e.max Ceram Deep Dentin Kit A-D

The IPS e.max Ceram Deep Dentin Kit contains the most popular shades of the Deep Dentin materials. The true-to-nature fluorescence, enhanced opacity, and shade saturation, ensure that the basic tooth shade is achieved even in very thin layers.

Kit contains one each of:

IPS e.max Ceram Deep Dentin A1 20g
IPS e.max Ceram Deep Dentin A2 20g
IPS e.max Ceram Deep Dentin A3 20g
IPS e.max Ceram Deep Dentin A3.5 20g
IPS e.max Ceram Deep Dentin B2 20g
IPS e.max Ceram Deep Dentin B3 20g
IPS e.max Ceram Deep Dentin C2 20g
IPS e.max Ceram Deep Dentin D3 20g
IPS e.max Ceram Deep Dentin A-D Shade Guide

596834

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Power Dentin

IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind. In the past, the goal of layering was to add translucency and depth to opaque frameworks. Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can often lead to a grayish appearance. IPS e.max Ceram Power powders have been formulated for application on translucent structural ceramics such as lithium disilicate and zirconia and help to keep value levels high to meet dentist and patient requirements. The Power materials may also be added to opaque substructures for increased brightness when the situation demands it.

CERAM_POWR_DENTIN

Ivoclar Vivadent emax Ceram

IPS emax Ceram Special Incisal Grey

The Special Incisal materials are used to intensify the incisal area. They may be applied either directly or as an intermediate layer between dentin and incisal.

597005

IPS e.max Ceram Transpa Refill 100g

IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.

605518

IPS e.max Ceram Transpa Refill 100g

IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.

605519

Product Info	additional 1	Item number:
		597052
		673378
		673377
		IPS_EMAX_CERAM_SELECTION
		602463
		597075
		685585
		590113
		590114
		614492
		681625
Ivoclar Vivadent e.max CAD Cerec Lithium disilicate (LS₂) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results. Years of clinical experience: The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained. Patients with devitalized teeth: Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance. Indications: Veneers (≥ 0.3 mm) Inlays and onlays Occlusal veneers, partial crowns Minimally invasive crowns (≥ 1 mm) Implant superstructures Hybrid abutment solutions Three-unit bridges up to the second premolar as the terminal abutment Advantages: Excellent esthetics and high strength (500 MPa*) Versatile applications and extensive indication range Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm Clinical long-term success and scientifically documented results Natural-looking esthetics irrespective of the preparation shade Adhesive, self-adhesive or conventional cementation depending on the indication	Prices range from R3 522.93 excl VAT	EMAX_CAD_CEREC
Ivoclar Vivadent e.max CAD IPS e.max® CAD is a high-strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). The IPS e.max CAD blocks for chairside processing are available in 16 A-D and four modern Bleach BL shades. They are available in two levels of translucency and two sizes. There are also an even more opaque blocks for the fabrication of frameworks (layering technique) in the laboratory. The IPS e.max CAD blocks with high translucency (HT) are used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers. For partial crowns and crowns, the less translucent (LT) blocks are used. The restorations are directly milled from the blue blocks. During a quick combined crystallization/glaze firing cycle, which supersedes polishing, the restorations acquire their high strength (360 MPa) and the desired esthetic properties (tooth shade, translucency, brightness). The restorations can be additionally individualized using the Stain materials. Finally, the restorations are seated. As an alternative to being placed using the adhesive cementation technique, crowns may also be cemented self-adhesively or conventionally.		EMAX_CAD_E4D
Ivoclar Vivadent IPS Empress CAD IPS Empress CAD This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done. A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal. Processing Options Once produced, restorations can be: polished stained (optional) – glazed Indications Crowns Inlays, onlays Veneers Your Benefits Highly esthetic restorations, efficiently created Clinically proven ceramic material with a flexural strength of 185 MPa* Optimum shade adjustment to the natural tooth structure due to the chameleon effect	** Prices From R2282,09	EMPRESS_CAD_CEREC
Ivoclar Vivadent Empress CAD IPS Empress CAD This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done. A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal. Processing Options: Once produced, restorations can be: polished stained (optional) – glazed Indications: Crowns Inlays, onlays Veneers Your Benefits: Highly esthetic restorations, efficiently created Clinically proven ceramic material with a flexural strength of 185 MPa* Optimum shade adjustment to the natural tooth structure due to the chameleon effect IPS Empress CAD is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done. A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to inc		EMPRESS_CAD_E4D
Ivoclar Vivadent emax CAD Cerec inlab IPS E.Max CAD CEREC/inLAB Impulse For the efficient fabrication of full-contour restorations (Monolithic Solutions) with maximum strength and toughness. The Blocks are available in A–D and Bleach shades and can be processed in the CEREC® or inLab® System from Sirona. They are optimally suitable for the monolithic fabrication of inlays, onlays, veneers, crowns and 3-unit bridges. Should esthetic charcterizations be necessary, they can be achieved with the staining or cut-back technique.		IPS_EMAX_CAD_CER_INL
Ivoclar Vivadent emax CAD Crystal IPS e.max CAD Crystall./Connect IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations. Dentin is used to add on to a crown should the interproximal contacts be short Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall Connect material		IPS_EMAX_CAD_CRYST_C
Ivoclar Vivadent e.max CAD Crystallization Shade IPS e.max® CAD Crystall/Shades Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.		IPS_EMAX_CAD_CRYST_SH
IPS e.max Ceram Add-On 20g IPS e.max Ceram Add-On materials are available in four shades. Depending on the application, users may select between a Bleach, Margin, Dentin and Incisal shade and opacity. The shaded add-on materials further facilitate adjustments.		597049
IPS e.max Ceram Deep Dentin Kit A-D The IPS e.max Ceram Deep Dentin Kit contains the most popular shades of the Deep Dentin materials. The true-to-nature fluorescence, enhanced opacity, and shade saturation, ensure that the basic tooth shade is achieved even in very thin layers. Kit contains one each of: IPS e.max Ceram Deep Dentin A1 20g IPS e.max Ceram Deep Dentin A2 20g IPS e.max Ceram Deep Dentin A3 20g IPS e.max Ceram Deep Dentin A3.5 20g IPS e.max Ceram Deep Dentin B2 20g IPS e.max Ceram Deep Dentin B3 20g IPS e.max Ceram Deep Dentin C2 20g IPS e.max Ceram Deep Dentin D3 20g IPS e.max Ceram Deep Dentin A-D Shade Guide		596834
Ivoclar Vivadent emax Ceram IPS e.max Ceram Power Dentin IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind. In the past, the goal of layering was to add translucency and depth to opaque frameworks. Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can often lead to a grayish appearance. IPS e.max Ceram Power powders have been formulated for application on translucent structural ceramics such as lithium disilicate and zirconia and help to keep value levels high to meet dentist and patient requirements. The Power materials may also be added to opaque substructures for increased brightness when the situation demands it.		CERAM_POWR_DENTIN
Ivoclar Vivadent emax Ceram IPS emax Ceram Special Incisal Grey The Special Incisal materials are used to intensify the incisal area. They may be applied either directly or as an intermediate layer between dentin and incisal.		597005
IPS e.max Ceram Transpa Refill 100g IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.		605518
IPS e.max Ceram Transpa Refill 100g IPS e.max Ceram is recommended for use with IPS e.max materials to achieve the highest level of shading and characterization.		605519