| | Dentalfarm Hydrovap Semi-Automatic System Cleaner
Steam cleaner featuring a large capacity stainless steel boiler, perfectly insulated and fitted with external resistance, a solution avoiding the corrosive action of limescale.
The water filling is activated by pressing the white button placed on the left of the frontal panel and can be operated during the daily use without waiting for the boiler to cool down. By pressing the white button the water is picked up from an external tank. In such a way, small quantities of cold water can be poured in, thus preventing the internal temperature to fall down. The operator must only pay proper attention not to exceed the maximum water level (as per the manual version).
This new model allows the optional connection to the water mains, a solution that can be chosen at the moment of the installation.
Steam is delivered through a spraying gun with adjustable flow.
Working pressure is set at 6 BAR and water temperature reaches 155°C, parameters assuring complete degreasing action and deep cleaning of any surface.
Technical Features
• Feeding Tension 230V AC
• Fuses 10 Amp
• Absorbed Power 1500 W
• Rated Current 5.8 Amp
• Tension on controls 24 V
• Boiler total volume 4.9 l
• Water Capacity 2.0 l
• External spare water capacity 5.0 l
• Water temperature 155 *C
• Pressure 6 BAR
• Time necessary to attain the steam temperature 10-12 min
• Overall dimensions mm 330x350x350h
• Weight (net /gross) kg 13.5 / 15.0
| | |
DFA2103P |
| | |
| | Dentalfarm Solar Professional Bench Lighting (No Magnifier)
WORKING LAMP
Professional working lamp assuring a wide lighting view over the operating area.
The lamp features two extremely powerful LED SMD bars for pure white light. Each LED bar can be operated individually (providing for simulteaeous or individual operation) and the brightness level can be adjusted electronically to achieve the most suitable working condition. The extensible double-joint arm allows for ideal position of the lamp thus avoiding any shades.
The lamp can be permanently fixed on the bench or hung on the wall by means of the available accessories to meet any space requirements.
LED light emission is white, 6.400° Kelvin, very similar to natural light.
Technical Features
- Bench Lighting
- Adjustable lamp with balanced movable arm
- 2 LED bars with 42 SMD LED each (ultra with light 6400° K)
- Possibility to switch on one LED bar only or both
- Electronic regulation of lighting power
- Fitting for bench assembly (either fixed or with clamp) or wall-mounted
- Lamp feature 84 SMD LED (21W) with electronic ballast
- Functions 2 parallel LED bars, which can also be used individually
- Electronic regulation Dimmer with buttons +/-
- Lighting 6.400°K
- Accessories supplied with Clamp for side bench fixing – base for firm bench fixing
- Line tension 110-240v A.C. 50Hz
- Absorption 21 W
- Dimensions 580 x 90 x 50 mm
- Arm extension 900mm
- Weight 2,6 kg (3,7 kg packed)
| | |
DFA7501 |
| | |
| | Dentalfarm Ideastudio Sandblaster
ALL-IN-ONE FINISHING UNIT FOR THE DENTAL CLINIC
BOX in methacrylate fitted with easy-to-replace transparent protection screen with a grid at the bottom allowing to separate grinding debris including a microblasting TANK assembled on stainless steel support, instant stop thanks to the EASY module; filter, pressure reducer and pressure gauge, pneumatic foot-control + a constant pneumatic SUCTION system to eliminate the fine dust produced by aluminum oxide.
Applications
ideally suited for the preparation of the retention wall for fixed prosthesis, before cementation
– finishing for CAD-CAM milled elements.
Installation
Ideastudio DOES NOT need any electric connection, only a pneumatic connection.
Precautions
It has been noticed that where extensive use of alcohol-based products is being used to disinfect surfaces small, irreversible cracks are formed on the plexiglass (polymethylmethacrylate).
Please be careful to avoid damaging the product.
Technical Features
• Nozzle: 1 per Ø 0,8 mm (Ø 1,2 upon request)
• Abrasive media: AL2O3150 (95μ) – AL2O3180 (85μ) – Microblast 90μ upon request, with Ø 1,2 nozzle: AL2O3120 (105μ)
• Suction System: pneumatic (Venturi)
• Filtration: Dry System (with cloth bag)
• Working Pressure: 2,0-4,0 BAR
• Dimensions: mm 280x320x300h
• Net Weight: 5,0 Kg
| | |
DFA1066+DFA1067 |
| | |
