12 Results

IVOdentIVOhealthProduct Infoadditional 1additional 2Item number:SIZESCollectionQtyPrice

Bluephase PowerCure Curing Light 100-240V

Intelligent LED light – carefree curing 

Patented Polyvision technology is your personal assistant when it comes to curing dental materials.    

This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends the exposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automatically interrupt the exposure cycle so that it can be repeated. Bluephase PowerCure comes with active anti-glare protection to prevent the light from being activated in open space.

Advantages

  • Reliable curing performance for all light-curing materials due to polywave LED
  • Short curing times starting from 3 seconds due to a high intensity up to 3,000 mW/Cm2
  • Wide 10>9mm light guide for time-saving single-exposure curing procedures
  • Additional Pre-Cure program

Efficient Aesthetics

Bluephase PowerCure forms a part of the "Direct Restoratives" product category. The products of this category cover the procedure involved in the direct restoration of teeth – from preparation to restoration care. The products are optimally coordinated with each other and enable successful processing and application. 

Experience the difference with 3s PowerCure

When direct Class I and II restorations are placed in permanent posterior teeth, 3-second exposures from the occlusal aspect are sufficient for all curing steps with the Bluephase PowerCure in the 3sCure mode. Simply expose Adhese Universal, Tetric PowerFill and Tetric PowerFlow to the light-intensity of 3,000 mW/cm2 produced by the curing light. You will notice right away that the curing time you require is considerably reduced. At the same time, you will continue to achieve the customary high-quality esthetic results

667092

Ivoclar Vivadent LED Curing Lights & Accessories

Bluephase Meter II

Indications:

Highly accurate radiometer for all types of curing lights

Advantages:

  • Unique measuring principle for the accurate measuring of light intensity
  • Can be used for all dental curing lights including plasma, halogen, and LED
  • Portable device with ergonomic design for daily mobile use
  • Unprecedented measuring accuracy for a radiometer with a accuracy of ± 10 % compared to the measurement with conventional     radiometers that have accuracy of >± 20 %
  • Dental-specific measuring range for wavelength ranges of 380 – 550 nm and light intensities of 300 – 12,000 mW/cm2
  • Digital display
  • 3-year warranty

Delivery Form:

  • Bluephase Meter II
667124

Ivoclar Vivadent Clinical Accessories and Instruments

Tweezers

Ivoclar Vivadent Tweezers can be used for moving hot sintering trays.

554069

Ivoclar Vivadent emax CAD Crystal

Ivoclar Modeling Brushes Assortment

These high quality sable modeling brushes are made from pure Kolinsky Sable hair. Pure, sable hair brushes exhibit a super fine tip along with great body and moisture retention which allows for precise porcelain placement.

Includes:

  • No. 10 Large Round (530388)
  • No. 6 Medium Round (530387)
  • No. G4 Medium Flat (530390)
  • No. 4 Small Round (530386)
  • No. G2 Small Flat (530389)
  • No. 2 Small Round (530385)
  • No. 1 Small Round (530384)
  • No. 0 Small Round (530383)
IVO_BRUSH_SIZE

Bluephase G4 Battery

Bluephase® G4 is an intelligent LED curing light thanks to its Polyvision™ technology that helps clinician ensure a more effective polymerization of light-cured dental materials. Polyvision alerts the clinician if they move the curing light probe away from the tooth while curing and dynamically adjusts the curing time to compensate for the movement.

691251

Bluephase G4 Grey 100-240V

Contents:

  • 1 Bluephase® G4 Handpiece
  • 1 Bluephase® G4 Battery
  • 1 Light Guide 10 mm Black (G4)
  • 1 Charging Base
  • 1 Power Cord
  • 1 Power Pack
  • 3 Anti-glare Cones
  • 50 Protective Sleeves
691258

Bluephase N G4 – The very small, cures all; high-performance curing light!

The innovative Bluephase N G4 is designed for the intraoral polymerization of all direct and indirect light-curing dental materials. This is a cordless high-performance curing light that combines maximum power with short cuing times. With Bluephase N G4 you achieve reliable curing with short exposure times from 5 seconds.

Due to its broad wavelength spectrum of 385-515 nm, it is suitable for all current light-curing dental materials.
 

The 4th generation of Bluephase LED curing light features 3 light intensities:

  • 2,000 mW/cm2 (Turbo Mode) @ 5s → With Ivoclar restorative materials used in all direct (Class I – V cavities) and indirect restorations (per mm of ceramic and per surface).
  • 1,200 mW/cm2 = High Mode @ 10s → With Ivoclar restorative materials used in all direct (Class I – V cavities) and indirect restorations (per mm of ceramic and per surface).
  • 950 mW/cm2 = PreCure Mode @ 2s → Removal of cement excess

 

Advantages:
• Reliable curing performance for all light-curing materials due to polywave LED
• Short curing times starting from 5 seconds due to a high intensity up to 2,000 mW/cm2 
• Homogeneous and wide 10mm light guide for time-saving single-exposure curing procedures
High-performance, reliability and efficiency are all features making the Bluephase N G4 a great companion for creating high-quality restorations.

Buy 1X Bluephase N G4 curing light and receive for FREE:

1X Tetric N-Line System Kit 11PCS (706758)
OptraGate Lip and Cheek Retractor sample (695568)
1X Tetric N-Bond Universal VivaPen (668222)

744011

TEKDN1

Intensiv Swingle, W&H Synea, Without Light

The contra-angle Intensiv Swingle combines both functions:

  • Free axial rotating of the strip, being applied during finishing and polishing of prepared surfaces.
  • Fixed axial position (12 positions at each 30 degrees within 360 degrees) for exact positioning of the strip, being applied in the resolution of the contact point and for enamel reduction. Moreover, the small sized contra-angle head allows a significantly improved view of the operating field.
  • Contra-angle with integrated water spray and optional light
  • Stroke 0.9mm
  • 20 000 oscillating movements with 40 000 rpm
  • With toggle switch to choose free rotating or fixed position of strips
  • 12 different axial fixed positions on 360 degrees.
  • File ejector and cleaning needle (water spray canals) are included in delivery
INTWG69A

Intensiv Swingle, W&H Synea, With Light

The contra-angle Intensiv Swingle combines both functions:

  • Free axial rotating of the strip, being applied during finishing and polishing of prepared surfaces.
  • Fixed axial position (12 positions at each 30 degrees within 360 degrees) for exact positioning of the strip, being applied in the resolution of the contact point and for enamel reduction. Moreover, the small sized contra-angle head allows a significantly improved view of the operating field.
  • Contra-angle with integrated water spray and optional light
  • Stroke 0.9mm
  • 20 000 oscillating movements with 40 000 rpm
  • With toggle switch to choose free rotating or fixed position of strips
  • 12 different axial fixed positions on 360 degrees.
  • File ejector and cleaning needle (water spray canals) are included in delivery

INTWG69LT

Ivoclar Vivadent Equipment: Furnaces

Programat CS2

Programat S2 is a compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials using a temperature of up to 1600°C. Programat S2 is integrated into the Ivoclar Vivadent workflow , providing optimally coordinated processing steps and consistently high-quality results.

Until recently, these processes would usually have taken five to eight hours to complete. Now, Programat S2 reduces the time required for sintering an IPS e.max ZirCAD crown coping to about 75 minutes[1]. With the Programat Dosto tray, approx. 40 single crowns can now be sintered at the same time in a single firing process, instead of only 25 as before.

Modern design and intuitive operation

  • Optimized firing tray for more space and better cooling
  • New membrane-sealed keypad with proven colour touchscreen display
  • Extension of OSD display to include the operating status “cooling”
  • Efficient and reliable performance due to software optimizations

645986

Programat CS6

Our multifunctional furnace is compact but can reach temperatures of up to 1,560°C (2,840°F). It's optimized firing chamber leads to faster programs and above all, increases the esthetics of your final restorations.

Superspeed crystallization

Speed up the world’s most used[1]all-ceramic material IPS e.max CAD

  • Crystallize restorations in just over 11 minutes[2]
  • Easily reproduce high-quality results thanks to advanced firing technology[3-6]
  • 10-year material guarantee

Esthetic sintering with proprietary vacuum

No longer sacrifice esthetics for speed

  • New, proprietary vacuum technology speeds up sintering
  • Outstanding level of esthetics is achieved despite the short program duration
  • Optimized for IPS e.max ZirCAD

Trade - In / Trade - Up deal on the Programat CS6:

SAVE R 50 000 when trading in any furnace for an upgrade to the CS6.

742087
To top