Furnaces

Ivoclar Vivadent Equipment: Furnaces

Programat CS2

Programat S2 is a compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials using a temperature of up to 1600°C. Programat S2 is integrated into the Ivoclar Vivadent workflow , providing optimally coordinated processing steps and consistently high-quality results.

Until recently, these processes would usually have taken five to eight hours to complete. Now, Programat S2 reduces the time required for sintering an IPS e.max ZirCAD crown coping to about 75 minutes[1]. With the Programat Dosto tray, approx. 40 single crowns can now be sintered at the same time in a single firing process, instead of only 25 as before.

Modern design and intuitive operation

• Optimized firing tray for more space and better cooling
• New membrane-sealed keypad with proven colour touchscreen display
• Extension of OSD display to include the operating status “cooling”
• Efficient and reliable performance due to software optimizations

Programat P310 G2 200-240V/50-60HZ

Your reliable partner for smart pressing procedures

Modern. Intuitive. Smart.

With the objective to meet the requirements of your dental laboratory. Proven technologies, such as the fully automatic press function (FPF), combined with new features - that is what makes the new Programat press furnace your reliable partner.

Innovative infrared technology (IRT) with integrated thermographic camera measures the exact temperature at the surface of the objects being fired and the investment ring. The Programat furnace automatically controls the pre-drying and closing process.

Modern design

• Dynamic colour concept
• Ergonomic shapes and forms
• Optimised cooling tray for more space and better cooling

High process reliability

• Fast and high-quality firing results due to infrared technology
• IoT function for free monthly equipment usage reports
• Pre-set programs and material groups

Intuitive operation

• New membrane-sealed keypad with proven colour touchscreen display
• New user interface featuring new symbols and icons
• Efficient and reliable performance due to software optimisations

Additional highlights

Fully automatic press function (FPF)

Due to the new patented and fully automatic press function (FPF), pressing is now even easier and more economical. All you need to do is put the investment ring into the furnace and press the start button - everything else is performed by the furnace itself.

Crack Detection System (CDS)

The Programat furnace features the Crack Detection System (CDS). This system identifies cracks in the investment ring at an early stage and reduces the pressure, if necessary. The press process ends in time to protect the restorations.

Automatic double-range temperature calibration (ATK2)

The ATK2 temperature checking system calibrates the temperature in the furnace fully automatically and accurately in two different temperature ranges. This ensures high-precision press and firing procedures and reproducible press and firing results with various types of materials (low- and high-fusing ceramics).

Convenient loading of the furnace chamber

Upon opening, the furnace head pivots upwards, and thus provides ample working space. As a result, the furnace chamber can be loaded easily and comfortably.

Software update via USB flash drive

It has never been easier to update your software: Simply plug in a USB flash drive containing the latest software version and press the “Software Update” button. The software is updated automatically.

Stand-by key to reduce power consumption

Efficient use of energy and responsible use of valuable resources: Ivoclar is committed to this goal. Therefore, our new Programat is equipped with the new Power Saving Technology. In the stand-by mode, the energy consumption of the furnace decreases by almost 40 percent. As a result, you save on electricity costs and help protect our environment. Look out for the “Power Saving Technology” label on the back of your device.

Only applicable for Ivoclar materials (according to the Instructions for Use)

Programat P710 G2 200-240V/50-60HZ

Take note – the G2 generation is only applicable to the Ceramic- and Press Furnaces (combination) – and not the CS (Chairside furnaces for Dentists) 

The Programat P710 ceramic furnace features infrared technology that can speed up the firing process by 200 % while enhancing the results as the thermal imaging camera controls the pre-drying and closing processes by measuring the temperature at the surface of objects being fired. Software calculates the most suitable times for these functions which can reduce ceramic cracking, while providing highly cost effective firing. A Digital Shade Assistant software application helps identify the ideal shade for the restoration, while the touchscreen is capable if viewing PDFs.

Programat EP5010 G2 200-240V/50-60HZ

Take note – the G2 generation is only applicable to the Ceramic- and Press Furnaces (combination) – and not the CS (Chairside furnaces for Dentists)

Ivoclar Vivadent: Programat Accessories

Investment Ring Cooling Rack

The cooling grid for the investment ring, which has been specifically developed for the Press technique, enables selective and optimum cooling.

Ivoclar Vivadent Equipment:Programat Accessories

Programat Firing Tray Kit

This large honeycomb tray can be used for IPS Empress CAD restorations. Support pins can be mounted on the tray when needed.

Presentation:

• 1 tray
• 4 metal pins A
• 4 metallic pins B
• 4 metal pins C

Ivoclar Vivadent: Programat Accessories

Programat Tong Holder

The Programat tong holder can be mounted to the Programat housing and permits convenient placement of the firing tongs. 

For Programat:

• P300
• P500
• P700
• EP3000
• EP5000

Equipment: Programat Firing Furnaces

Temperature Checking Set 2

The temperature checking set is used to check and adjust the temperature in the Programat furnace chamber.