21 Results

IVOdentIVOhealthProduct Infoadditional 1additional 2Item number:ShadeSizeSIZESCollectionType (X)Unit Measure (Y)Unit MeasureChoose ColourQtyPrice

Ivoclar Vivadent emax CAD Crystal

IPS® Object Fix Flow & IPS® Object Putty

Auxiliary firing pastes with different levels of viscosity to support allceramic restorations (particularly IPS e.max® CAD) during firing and crystallization. The pastes are used to stabilize and secure the restorations on the silicon nitride support pins or directly on the silicon nitride firing tray. The pastes are easy to apply and remove after the firing procedure.

IPS_OBJECT_FIX

Ivoclar Vivadent emax CAD Crystallization Glaze Paste

IPS e.max® CAD Crystall Glaze Paste

Special glaze paste to be used with fully anatomical IPS e.max® CAD restorations. It may be applied either prior to crystallization on the "blue" crown or in the subsequent firing cycle.

605363

Ivoclar Vivadent emax CAD Crystallization Glaze Liquid

IPS e.max® CAD Crystall./ Glaze Liquid

Special liquid to dilute IPS e.max® CAD Crystall./Shades and Stains and the IPS e.max CAD Crystall./Glaze Paste.

605366

Ivoclar Vivadent emax CAD Crystal

IPS e.max® CAD Crystall./ Add-On, Liquid

For adjustments, such as in incisal/occlusal or dentin areas. These adjustments can be made directly with the crystallization firing or in a subsequent corrective firing cycle.

605569

Ivoclar Vivadent emax CAD Crystallization Glaze Spray

IPS e.max® CAD Crystall Glaze Spray
This is used with fully anatomical IPS e.max® CAD restorations. It is sprayed on the restorations once IPS e.max CAD. Crystall./Shades and Stains have been applied. Subsequently, the restorations are fired in a combined crystallization and glaze firing cycle.

605364

Ivoclar Vivadent emax CAD Crystal

Ivoclar Modeling Brushes Assortment

These high quality sable modeling brushes are made from pure Kolinsky Sable hair. Pure, sable hair brushes exhibit a super fine tip along with great body and moisture retention which allows for precise porcelain placement.

Includes:

  • No. 10 Large Round (530388)
  • No. 6 Medium Round (530387)
  • No. G4 Medium Flat (530390)
  • No. 4 Small Round (530386)
  • No. G2 Small Flat (530389)
  • No. 2 Small Round (530385)
  • No. 1 Small Round (530384)
  • No. 0 Small Round (530383)
IVO_BRUSH_SIZE

IPS e.max CAD Crystall Stains Refill

Intensive stains in paste form for the reproduction of natural characteristics. They are optimally coordinated for use with IPS e.max CAD.

IPS_EMAX_CAD_CRYST_S

Ivoclar Vivadent e.max CAD Crystallization Shade

IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.

IPS_EMAX_CAD_CRYST_SH

Ivoclar Vivadent emax CAD Crystal

IPS e.max CAD Crystallization Pins

The crystallization pins are required for the crystallization of fully anatomical, milled IPS e.max CAD restorations. This firing tray must not be used to fire IPS e.max Ceram.

605368

Ivoclar Vivadent emax CAD Crystal

IPS e.max® CAD Crystallization Tray, Pins
Silicon nitride firing tray for the crystallization of IPS e.max® CAD restorations. The crystallization pins supplied are required for the crystallization of IPS e.max CAD LT restorations.

605367

Ivoclar Vivadent Clinical Accessories and Instruments

Tweezers

Ivoclar Vivadent Tweezers can be used for moving hot sintering trays.

554069

IPS e.max CAD Crystall/Add-On 5g Dentin

IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.

  • Dentin is used to add on to a crown should the interproximal contacts be short
  • Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
605365

Ivoclar Vivadent emax CAD Crystallization

IPS e.max CAD Crystall./Add-On 5g Dentin

IPS e.max CAD-on technique allows the lithium disilicate glass ceramic (LS2) IPS e.max CAD to be used for the fabrication of high strength zirconium oxide-based restorations.

  • Dentin is used to add on to a crown should the interproximal contacts be short
  • Connect is used to fill any areas in the interface between the zirconia and lithium disilicate that may have been left open with the Crystall. Connect material
635549

Ivoclar Vivadent IPS Empress

IPS Ivocolor Glaze

  •  IPS Ivocolor Glaze Paste is a new, thixotropic glaze paste for a high degree of glaze in only one firing cycle. The glaze is available with or without fluorescence and is compatible with all IPS ceramics.
  •  IPS Ivocolor Glaze Powder impresses users with its excellent mixing and handling behaviour and is ideally suited for the glazing of layering ceramics.
IVOCOLOR_GLAZE

Ivoclar Vivadent IPS Empress

IPS Ivocolor Mix Liquid Allround

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IPS Ivocolor Mixing Liquid Longlife

Produces a higher viscosity and remains applicable for a longer period of time (approx. 1 week).

IVOCOLOR_MIX_LIQUID

Ivoclar Vivadent IPS Empress

IPS Ivocolor Essence

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IVOCOLOR_ESSENCE

Ivoclar Vivadent IPS Empress

IPS Ivocolor Shade Incisal

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IVOCOLOR_SD_INCISAL

Ivoclar Vivadent IPS Empress

IPS Ivocolor Shade Dentin

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IVOCOLOR_SD_DENTIN

Ivoclar Vivadent Equipment: Furnaces

Programat CS2

Programat S2 is a compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials using a temperature of up to 1600°C. Programat S2 is integrated into the Ivoclar Vivadent workflow , providing optimally coordinated processing steps and consistently high-quality results.

Until recently, these processes would usually have taken five to eight hours to complete. Now, Programat S2 reduces the time required for sintering an IPS e.max ZirCAD crown coping to about 75 minutes[1]. With the Programat Dosto tray, approx. 40 single crowns can now be sintered at the same time in a single firing process, instead of only 25 as before.

Modern design and intuitive operation

  • Optimized firing tray for more space and better cooling
  • New membrane-sealed keypad with proven colour touchscreen display
  • Extension of OSD display to include the operating status “cooling”
  • Efficient and reliable performance due to software optimizations

645986

Programat CS6

Our multifunctional furnace is compact but can reach temperatures of up to 1,560°C (2,840°F). It's optimized firing chamber leads to faster programs and above all, increases the esthetics of your final restorations.

Superspeed crystallization

Speed up the world’s most used[1]all-ceramic material IPS e.max CAD

  • Crystallize restorations in just over 11 minutes[2]
  • Easily reproduce high-quality results thanks to advanced firing technology[3-6]
  • 10-year material guarantee

Esthetic sintering with proprietary vacuum

No longer sacrifice esthetics for speed

  • New, proprietary vacuum technology speeds up sintering
  • Outstanding level of esthetics is achieved despite the short program duration
  • Optimized for IPS e.max ZirCAD

Trade - In / Trade - Up deal on the Programat CS6:

SAVE R 50 000 when trading in any furnace for an upgrade to the CS6.

742087

Ivoclar Vivadent Ivocolor

IPS Ivocolor Shade Guide Shades

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

668575
To top