High-Level Instrument Disinfectant
Active Ingredients:
0.575% Ortho-pthalaldehyde;
0.4% Rust Inhibitor; 2% Surfactant; 97.025% Inert Ingredients
Product characteristics:
Ready-to -use; Locally Made;
Non-corrosive; Non-staining Non-caustic; Biodegradeable
Recommended Uses:
Sterilisation / disinfection of pre-cleaned thermo-sensitive instruments. Sterilisation / disinfection of pre-cleaned instruments where a functional calibrated autoclave is unavailable.
Instructions for use:
Decant the required amount of OPA into a clean, dry, covered stainless steel or HDPE receptacle. Completely immerse thoroughly disassembled, pre-cleaned, rinsed & dried instruments / devices in the liquid, ensuring that any hinges or joints are in the open position. Allow a contact time as per your desired efficacy – see below efficacy table. Remove the instruments / devices from the liquid using sterile forceps, and follow the post-sterilisation procedure of the facility. Tray-life of the liquid should be tested weekly using M.E.C. strips. The product should have a tray-life of between 14 & 21 days, should the strips prove a shorter life, check your instrument cleaning process. For best results, replace the liquid every 14 days, or as soon as an MEC Test Strip reads less than 0.5% active ingredient, or immediately if any change in liquid colour occurs.
Pre-Requirements:
Latex or nitrile gloves, protective aprons and chemical splash goggles. Use only in well-ventilated areas.
Product Description:
Available sizes: 20L, 5L, 1L
Dilution Factor: Ready to use
Physical Form: Pale yellow liquid
Odour: Chemical Odour
pH: 7-9
Risk Classification: C / IIb
GMDN Code: 40579
GMDN Descriptor: Gluteraldehyde Device Sterilant
NRCS Reg. no.: Pending
Medical Device Reg. No.: Awaiting Registration Call-up
Incompatibility: Do not mix with other chemicals
|